Installation diagram of Windows 2000 server disc startup

Installation diagram of Windows 2000 server disc startup

I. preparations:
1. Prepare the installation disc for Windows 2000 server Simplified Chinese version, and check whether the optical drive supports auto-start.
2. if possible, use the disk scan program to scan all hard disks to check hard disk errors and fix them before running the installer. Otherwise, it will be troublesome to check hard disk errors during the installation process.
3. Record the product key (installation serial number) of the Installation File with paper ).
4. if possible, use a driver backup tool (for example, driver genie 2004 V1.9 Beta.exe) to back up all drivers in the original Windows 2000 to the hard disk (for example, F: \ Drive ). It is best to write down the model and manufacturer of the main hardware such as the motherboard, Nic, and video card, and download the driver for backup in advance.
5. If you want to format disk C or disk D during installation (we recommend that you format disk C during installation), back up the useful data of disk C or disk D.
Ii. Start the system with a CD:
(If you already know how to do this, go to the next step), place the 2000 installation disc to the optical drive, restart the system, set the optical drive to the first boot disk, save the settings, and restart the system, you can see the installation interface without accident. If you do not know the specific method, refer to the same --> how to enter the pure dossystem
3. Install Windows 2000 server
After the CD is automatically started, the installation interface is displayed as shown in Figure 1. (Some of the installation discs sold on the market are displayed at startup when "Press ang key to boot form CD .. you need to press Enter to start the screen in Figure 1. Otherwise, go to the next boot disk to start .)

Figure 1
This step has three options: "1. to start installing Windows 2000, press ENTER and 2. to fix Windows 2000 Chinese version installation, press R 3. to stop installing Windows 2000 and exit the installer, press F3. Here we select the first item and press Enter. 2 is displayed.

Figure 2
License Agreement, there is no choice here, after pressing "F8", as shown in Figure 3

Figure 3
Click the "down or up" arrow to select the partition used for system installation. After selecting the partition, press the "Enter" key and press Enter. The installer will check the selected partition, if this partition has been installed on another system, 4 is displayed.

Figure 4
To use the selected partition for installation, press the "C" key, as shown in Figure 5

Figure 5
You can format the selected partition to convert the file system lattice or save the existing file system. There are multiple options, however, it should be noted that the NTFS format can save disk space, improve security and reduce disk fragments, but there are many problems at the same time: partitions in the NTFS format cannot be seen in DOS and 98/Me, select "format disk partition with FAT file system" and press "Enter". 6 is displayed.

Figure 6
Format the drive C of the selected partition. Press the F key to format the drive c. 7 is displayed.

Figure 7
Because the space of the selected partition C is greater than 2048 MB (2 GB), the FAT file system does not support disk partitions larger than MB, so the installer will format the C disk in the format of the FAT32 file system, press Enter, as shown in figure 8.

Figure 8
Figure 8 is formatting the C partition; the formatting partition option can be provided during installation only when you start or install the boot floppy disk to start the Windows2000 installer; if you start to enter DOS with a MS-DOS boot disk, when you run i386 \ winnt to install Windows2000, there is no formatting partition option when installing Windows2000. After the C partition is formatted, the installer starts to copy files from the disc, as shown in figure 9.

Figure 9
Figure 9. copy the file. After the file is copied, the system automatically restarts 15 seconds later, when the system restarts, set the hard disk as the first boot disk or temporarily remove the installation disc before starting it, so that the system does not enter an endless loop and restarts the installation program. The 2000 startup screen appears for the first time after restart, as shown in figure 10.

Figure 10
Next appears, as shown in Figure 11.

Figure 11
After the device is started, check the device and install the device. A black screen is displayed, which is normal, as shown in Figure 12.

Figure 12
Select the default value for Region and language settings. Click "Next", as shown in Figure 13.

Figure 13
Enter the name and unit you want, and click "Next", as shown in figure 14.

Figure 14
If you haven't written down the product key (installation serial number) in advance, it's a big deal! Here enter the installation serial number such as: H6TWQ-TQQM8-HXJYG-D69F7-R84VM, click "Next" button, appears as 15

Figure 15
Here you can select either of the following items as needed: select the first item for the server, and select the second item for the workstation (same as Windows 2003). Then, click "Next", as shown in Figure 16.

Figure 16
Enter the computer name as the default server name. Enter the system administrator password twice. Remember this password and use it at login. Click "Next", as shown in figure 17.

Figure 17
If the component option is displayed, select it as needed, or change it in Add/delete after installation. Click "Next" to continue, as shown in Figure 18.

Figure 18
Do not talk about the date and time settings. Click "Next" and then start to install the network, as shown in Figure 19.

Figure 19
Select "typical" for network settings and click "Next", as shown in Figure 20.

Figure 20
Click "Next" to start installing components, saving settings, and deleting used temporary files. After the task is completed, it appears, as shown in Figure 21.

Figure 21
Click "finish" to complete the installation. After the system restarts, the screen shown in Figure 22 appears.

Figure 22
Press Ctrl + Alt + Delete to start the system, as shown in Figure 23

Figure 23
Enter the password you set during installation, as shown in Figure 24

Figure 24
If you do not want to configure your server, you can configure it later and click "Next" to display the desktop as shown in Figure 25.

Figure 25
Deselect the check box in front of "show this screen at startup". The window will not appear at next startup and close the window directly. The desktop appears, for example 26.

Figure 26
Windows sever 2000 started successfully
Iv. Basic settings
After the installation is complete, the post-installation work takes much longer than the installation time.
1. After the installation is complete, check whether all the device drivers have been installed. --> see driver installation.
2. Set up an Internet connection to update the system. --> Refer to setting up broadband connections.
3. Install software
4. Optimization and backup system --> refer to System Optimization

Author: "potato space"