Installation of Mac OS dual system and iPhone Development SDK in Win7

InWin7Environment InstallationMac OSDual System andIPhoneDevelopmentSDKThe tutorial is the content to be introduced in this article. Let's just look at the content. I want to learn more about Iphone development, but I encountered a problem in the first step. I need to install a "black apple" operating system, which is more troublesome than I thought, after several days, the system was broken down ~~. Finally, I installed it. To sum up.

I read some articles and said, "I have tried three or four versions of OS X: Kalyway 10.5.2, iDeneb 10.5.5, iDeneb 10.5.7, and iaTKos v7i 10.5.7. The first installation is Kalyway 10.5.2, which can be successfully installed, but the video card and audio card driver do not exist, so I finally gave up. Try iDeneb 10.5.5. After installation, you can only enter the security mode. iDeneb 10.5.7 cannot recognize the hard disk and cannot install it. The iDeneb version also gives up. Finally, I tried iaTkos v7i 10.5.7 and installed it successfully ."

I was most afraid of trouble, so I did it.

I. Required software:

1. Acronis Disk ctor Suite 10 is a good Disk management tool, similar to PM, because I used PM to break a bad hard Disk, so I had to reject PM) or use PM.

2. EasyBCD 1.7.2 multi-system Boot Tool)

3. TBOOT is also a system Boot Tool)

4. WIN7 installation CD

5. iATKOS V7i 10.5.7

2. Preparations

1. Enter the BIOS and set the hard disk mode to "AHCI ".

PS: During the first installation, the system was directly set under Dos, and then there was a problem. The screen was flushed all the time and the system could not be entered. Then the BIOS was restored before it was entered into the system.

After checking, you need to first start the AHCI driver option disabled by Win7. The specific method is very simple. Modify the Registry

HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Msahci value. In the right pane, right-click "Start" in the "name" column and change the original value to 0.

Re-enter the BIOS modification.

2. Install WIN7 to drive C.

3. Enter WIN7 and use Acronis Disk ctor Suite 10 or PM.) create a separate space larger than 20 GB after drive C and format it to FAT32. It is best to set a easily distinguished volume name, this partition is used to install mac OS X.

PS: it is explained that I set this partition as the primary partition when installing it. I do not know why I cannot erase it into the HFS system format when installing mac OS. It is always in Windows format. I don't know why. I tried again and later found that setting it to a logical partition would be fine.

3. Install MAC OS X

1. Place the iATKOS v7i disc, restart the computer, and boot it with the optical drive;

2. When "Press anykey to start up from CD-ROM, or press F8 to enter Startup Options" appears, Press F8, enter-v after BOOT, then press enter, in this case, the installer starts to check the hardware and read the disc data to guide the installation;

3. When the first interactive screen appears, click the arrow button in the lower right to go to the next step. Then, an interactive screen appears and click "CONTINUE". After a while, a red apple interactive screen appears, the MAC installer is already running;

4. Select "Utilifies" in the upper menu bar. The menu is displayed. Select "Disk Utility" to go to the Disk tool;

5. In the disk tool, select the ERASE on the right bar, select the FAT32 partition you just created on the left, select the mac OS extended log on the right bar, and click ERASE below, such a mac OS partition is built;

6. Click "X" in the red button on the top left of the disk tool to exit the disk tool. Click the next one and select the created mac OS partition as shown in the figure below ), click next and the next step is the key step;

7. This step is the most critical step. Click "m" to enter the CUSTOM options. If you select an error here, the installation may fail.

PS: do not select too many drivers. I only choose the hard drive and the PS2 driver for the keyboard. If not, the PS2 keyboard cannot be identified, token.

8. After the selection, click Install to officially start installing MAC on the hard disk. After the installation is complete, restart the system.

Iv. Dual-system boot settings

After the MAC is installed and restarted, the system will be BOOT0: TESTING BOOT0: DONE. Now, the MAC cannot be started, and the installed Windows 7 cannot be booted. First, we need to fix WIN7 and then set dual system boot:

1. Start with the WIN7 installation disk. When the "Install now" screen is displayed, select the second item in the left to repair the system;

2. After the repair is completed, restart Windows 7 and install EASYBCD;

3. EASYBCD settings;

PS: the setting is very simple. It is really EASYBCD. if you add a driver, the MBR will be automatically modified.

4. Save and exit after setting, copy TBOOT to C:/nst/, and rename it nst_mac.mbr;

5. Restart. the startup option is displayed. The dual-system installation is complete.

5. Driver Installation

After a long time, you can enter the Mac system !!!

It looks pretty, but the drag will produce a shadow. You need to install the video card driver. It seems troublesome to install the Mac driver. You can download the MacOSx86UniversalOSx86Installer and install the automatic driver. It is very simple. If you cannot find the corresponding video card model, you can follow the video card parameters, simulate a virtual custom graphics card type, which is quite powerful.

See: http://www.memac.cn/read.php? Tid = 1210

You don't need to set anything about the network. You just need to set the IP address, mask, gateway, and so on in the network options. If you want to set the language, you can select Chinese in the internationalization options, the input method is not particularly useful.

6. Install the Iphone SDK

1. The system can be upgraded. Downloading an Upgrade package can be upgraded to a slightly newer version, which is limited to 10.5.X. Updating to 10.6.X may cause problems.

2. Download the Iphone SDK, which contains XCode.) There are about 2 or more G sdks, and only 3.0 sdks and 3.2SDKMac OS that requires 10.6.X.

Now, we can officially start the Iphone development journey.

Summary: InWin7Environment InstallationMac OSDual System andIPhoneDevelopmentSDKI hope this article will help you with the introduction of this tutorial!