Installation of Win8.1+mac OS X 10.10 Dual system tutorial in Windows environment

First of all, I would like to thank the future forum of the Great Gods of the posts without their share I can not smoothly loaded on Mac OS X 10.10!

This essay is written mainly to prevent myself from forgetting, and to share my experience with you.

This tutorial is for friends who use bios+mbr Partitioning

First of all, introduce my Computer hardware information

Installation Environment: win8.1 system

Guide Mode: Chameleon r2378

I. Preparatory work

1. Download the Mac OS X 10.10 Image (This image is an unofficial image of the lazy version) address: Http://pan.baidu.com/s/1gdEf4Gj

2. Download the tools you need to use, I will use all the tools needed to pack into the Baidu network disk: HTTP://PAN.BAIDU.COM/S/1O6L0YHK

3. Prepare a USB flash drive to make a PE disk (after installing the MAC system, you need to use this PE disk to set the Windows boot partition to active or you will not be able to enter any system!) ）

Install the U-Master tool in the kit and insert the USB flash drive by clicking on a button

　　　　

Two. Install Chameleon boot

1. Chameleon_install.rar in the Unpacking kit Select the system and click Install

2

2. Unpack the Wowpc.iso.chameleon_2.2svn_r2378_trunk_10.10.zip within the Toolkit to replace the Wowpc.iso in the copy file to the C drive (system disk) root directory Wowpc.iso

　　　　

3. Add a chameleon to the boot entry using EASYBCD (available in the kit)

Follow the order in the picture

　　　

Three. Write to Mac OS X10.10 system image

1. Check if the hard drive is turned on AHCI(Mac system to SATA interface mode requires AHCI) to open Device Manager

　　

Due to different motherboard BIOS setup method is not the same please Baidu corresponding model SATA modification method

If you cannot enter the system after you turn on AHCI, consider entering safe mode and then canceling safe mode to turn on AHCI

1)win+r key input msconfig enter

　　　　

2) After turning on Safe mode, change the SATA interface mode to AHCI and enter

　　　　

3) After entering safe mode and then canceling the Safe Mode by the method above, you will find that AHCI opens up.

2. Write the image to the installation partition

Open windows comes with Disk Management compressed volume compressed 7G and 50G (according to personal circumstances can be divided into multipoint) size two volumes out (7G as a Mac installation partition, 50G is the real Mac system partition) and the two partition to assign the drive letter remember not to format! , here's a picture of the Vision forum

　　

　　

　　

3. Use the Leopard HDD Assistant in Leopard3987com.rar after partitioning ( be sure to run with Administrator privileges!) ) to write the image to the installation partition (the write process may not be responding do not shut down patiently wait for good)

　　　　

Successful will prompt all done, with the fun effect:

　　　　

If the tag is prompted for change partition type to af:success then ignore the settings below the partition identity

4. Modify the partition ID to AF

If the tag is prompted for the change partition type to Af:faild in the Open Toolkit, the Diskgenius check out the two partitions by right-clicking the partition identifier after selecting "alter Partition parameter"

Manually change to uppercase AF

　　

Three. Reboot to start installing Mac

1. In Windows boot, select the boot entry created in EASYBCD before entering the Chameleon

　　

2. After entering the computer will automatically reboot into the Chameleon boot interface, from the Chameleon boot interface choose to boot from the installation partition

　　

It's going to be a long time. Please be patient if there is a card in the situation, please check with the vision of the five countries to find a solution (this place is a snag of black apples)

Address of the five countries: http://bbs.pcbeta.com/viewthread-863656-1-1.html

3. Official installation of Mac OS

Select language

　　　　

In the upper left corner of the screen, find " utilities "-" Disk Utility "

　　　　

Select the partition of the Mac OS System (50G that) Click Erase format to select Mac OS Extension (journaled) erase (Ps: Just format one partition) and exit before continuing the installation

　　　　

Select the partition you just erased click Install

　　　　

Patient system installation, waiting period do not let the computer hibernate or shutdown

　　　　

　　　　

After installation, reboot you will find that the PE disk will come in handy when it is not turned on. From the BIOS select boot from USB stick into PE in PE via DISKGENIUS to set the Windows system disk as active partition ( right click on the disk

Select "Activate current Partition") to

4. Enter the Windows system to copy the extra folder in the installation partition to the root of the Mac disk (the Apple partition can be read and written after the hfs+ for Windows 10.0 in the toolkit is installed)

Extra folder contains three files

(1)org.chameleon.Boot.plist (files containing some boot information)

(2)smbios.plist (model configuration file, personal understanding of this thing is to make their own computer into the corresponding Apple computer to identify the system, this file needs to be based on the configuration of their own computer to choose their corresponding)

　　　　　　(3)Extensions folder (store third-party-driven folders This is the e/e folder in the Forum People's mouths)

　　　　5. Use the notepad++ in the toolkit to edit the org.chameleon.Boot.plist

Add the following code (if the code already exists, modify it to the same time as below)

　　　　　　<key>Kernel</key>
<string>/System/Library/Kernels/kernel</string>

Four. Reboot into Mac system

　　1. If there are five countries in this step, do not rush to change things, installation interface can go in theory this place is not five countries.

So if there's a five-country restart, enter- s for Mac system disk selection from the Chameleon Boot interface

Then press ENTER to enter the single user interface (non-graphical interface)

Enter the following code to rebuild the cache, press ENTER once per line

　　　/sbin/fsck-fy
/SBIN/MOUNT-UW/
Chmod-r 755/system/library/kernels/kernel
Chown-r Root:wheel/system/library/kernels/kernel
Chmod-r 755/system/library/extensions/
Chown-r root:wheel/system/library/extensions/
rm-rf/system/library/caches/*
Reboot

　　　After restarting, go to the installation partition and repair the MAC system disk by using the utility tool 's Diskette tool and then enter the Mac system.

2. If you still have five countries, please check with your vision five countries to resolve

Five. Install the driver

　　Because everyone's computer hardware configuration is different so this section does not do a detailed description only attached to my various driver solutions and my extra files, driving problems can go to the Vision Forum slowly crawl paste solution, if the model (Thinkpad E431_6HC Ps: E431 a lot of different models) you can use my extra file directly (Http://pan.baidu.com/s/1c04cotM)

Toolkit Http://pan.baidu.com/s/1c0CjLJy in Mac Environment

Describe the files in the toolkit

　　time synchronization patch. Pkg (see the name to know the need to install in a Mac environment)

　　Ioregistryexplorer.zip (software that looks at various hardware details under MAC)

　　Voodoohda2.8.7pkg.zip (Universal sound card driver, your own sound card can try this)

　　Multibeast-yosemite-edition-7.1.1.zip (can be understood as the driver of the Mac system Ps: Personally, I feel something old in here. Some of the drivers needed for the new machine part of the hardware are not found in this area)

　　kext_wizard.zip (tool for installing kext driver files in Mac environment)

　　ACPIBatteryManager.kext.zip (with my DSDT driver for battery management)

Graphics card:HD4000(nuclear display) Delete system/library/extensions folder in addition to HD4000-related graphics drivers via SMBIOS.PLIST+DSDT driver

　　

Sound card: I am using the Universal sound card driver voodoohda2.8.7pkg into the MAC system after installation can be used

Card:

Wired network Carrie rtl8168f pci-e Gigabit Ethernet NIC: Install via multibeast-yosemite-edition-7.1.1.zip software in a Mac environment

Wireless card Bo Tong BCM43142 802.11b/g/n no Solution ~

Six. PostScript

Black Apple is not a simple installation system it takes a while to toss, and I've been tossing it for almost one weeks to get it done, thanks to the long-term forum of you, Daniel.

Selfless dedication, the experience of their own black apple all hair in the forum for everyone to study and study!

Finally, I enclose a word of wisdom: life is a toss

haha ~ ~ Hope that we can also be able to pack their own black apples soon

Installation of Win8.1+mac OS X 10.10 Dual system tutorial in Windows environment