Installing a Linux system diagram with a USB flash drive

A time ago to a server installed Linux system, tossing a lot of time, the following installation process to write out after who has similar installation can be quickly completed installation, because the server's optical drive can not be used, and did not find the external optical drive, so use a USB stick to boot to install the system.

the following centOS6.5 for the introduction of graphic installation, the process will have some problems, I will put together a solution, for your reference, because there are a lot of pictures so a blog may be too long, divided into several to introduce the entire installation process.

1, first find a Windows system computer with UltraISO to open the ISO (for example: Centos-6.5-x86_64-bin-dvd1.iso), then click "Start", "Write to Hard disk image", the hard drive is your u disk, image file installation CD ISO, write by usb-hdd+, click "Write" button. After the completion of the installation of the U-disk is ready. This step is very simple, do not map.

2, from the online system Centos-6.5-x86_64-bin-dvd1.iso (4 multi-g), there will be a centos-6.5-x86_64-bin-dvd2.iso (1 multi-g). The first to make a U disk boot, you have to use 8G and above the capacity of the U disk, after the completion of the second also copied to the root directory of the U disk ( Why do you say later ), the Internet said the first copy to the U disk, After the production of the USB stick format is FAT32 fundamental copy not go to the first ISO file .

3, with the production of a good U disk boot boot computer (need to set up a USB flash drive, this should not say it more), after entering the default first, OK next

4, the installation process of the language interface, Select Chinese (Simplified), Simplified Chinese, and then enter

5. The language confirmation interface appears directly to enter, The following keyboard mode selection interface appears: Select keyboard mode, default

6. Located on hard drive , directory holding image does not need to be filled out, the system will automatically fill in. (In fact, this is the search image directory under the install.img file) Select OK, press ENTER,

Note: Here the/DEV/SDB4 represents your U disk partition, we have already copied the system image to the root of the USB stick below, here the system will be automatically recognized. If you select not a USB drive, the partition will report the following error:

7. Direct Click OK, the Installation interface will appear:

8, click Next, Select the drive: Choose the first item

9. Set computer name: just fill it out to your liking.

10. Set the time zone (for example): By default you can

11. set Root password ( Note: If you use the password is too simple, the system will automatically prompt, here can choose "still use")

The next article continues ...

Installing a Linux system diagram with a USB flash drive