Installing a Linux system with a USB flash drive

1. Download and install: UltraISO. Rogue software too much, the last is in the Baidu Software Center, recommended.

2. Insert the USB drive. Open UltraISO, then: File--open--Select your ISO file to open.

3. UltraISO, select: Start--write to hard disk image--hard drive Select the hard disk you want to start as Startup disk, and then click Write to start the USB drive successfully.

4. Copy the liunx ISO file to the USB flash drive (the top-most page of the USB stick, this step seems to be necessary).

5. Restart the computer on which you want to install the system, and select the USB drive. Then the step by step is OK.

Set the server network environment,     

  device= Eth0type  =ethernetuuid  =70872786-792a-48fc-aa5a- b542d75fa95conboot  =yesnm_controlled  = yesbootproto  =defroute  =yesipv4_failure_fatal  = Yesipv6init  =noname  = "System eth0"  =00:0b:2f:40:db:01last_connect  = 1427520365 ipaddr  =172.16.6.99netmask  = 255.255.255.0gateway  =172.16.6.1dns1= 172.16.1.3    

Several points to note during the installation process:

1. The selection of the installation content, the default is basic, personal preferences to install desktop, that is, with the table environment.

2. There is also a choice of installation disk, the default is a U disk, you should choose the computer's own hard drive, do not forget to change.

Installing a Linux system with a USB flash drive