Installing OpenStack with fuel (top)

installing OpenStack using fuelReproduced in http://tianhunyongheng.blog.51cto.com/1446947/1605349 1. Installation Instructions:

Deploy Hardware: Windows 7 (8GB RAM\I3,CPU must support virtualization) + VirtualBox 4.3.20

Virtual machine Download: https://www.virtualbox.org/wiki/Downloads

Deployment Tool:mirantis Fuel 6.0,openstack Juno

Mirror address: Http://pan.baidu.com/s/1jG9VkyE 2. Deploy the network: (1) Net1 network address: 10.20.0.0 This is master's private network, when we visit the Web is to go this network;
(2) Net2 network address: 192.168.4.0 This is OpenStack's management, storage and virtual machine internal network;
(3) Net3 network address: 172.16.0.0 This is a public network, is also a floating IP network segment, the virtual machine to provide external network.

The details are shown in the following figure:

3. The specific steps are as follows:

Open VirtualBox First, click "New" to create a new virtual machine

We name "Master", type "Linux", version select "Redhat",

Because the installation process resource consumption is large, it is allocated 4G memory, the installation can be adjusted to a small

Create a new hard disk

The default VDI hard drive can

Because it is in this machine, in order to save space, choose "Dynamic Allocation", the actual deployment environment if enough space, select "Fixed size", the speed will be a little faster.

Select the storage location of the hard disk, preferably more than 40G

After the virtual machine is created, let's set up the virtual machine, select the "Master" virtual machine, then click "Settings" above

Select "Storage", assemble the Mirantisopenstack 6.0 image, download the address see start description

The first card Select # #, the second NIC Select # #, the third network card selection # #, each virtual machine is so, convenient management, because OpenStack virtual machine needs PXE boot, so the NIC must choose "Fast III", because the network support VLAN, so promiscuous mode to select "All Allow ”

Above the virtual machine interface name from the following, first select VirtualBox "Management", select "Global Settings", click "Network" to set the network, we click the Host network, and then add three network cards as follows, the IP address is set as follows, disable DHCP, the job of each network has been explained before.

OK, select "Master" host, right click, start. Start installing fuel master as below

With the start of automatic installation, the CentOS system has been streamlined and the installation package is only 305, this process quickly

As follows into the long waiting time, I've been here for at least one hours or so

Finally wait until this end of the screen: The system user name password is root,r00tme;fuel Web address is 10.20.0.2::8000, user name password is admin,admin. Because this address is the default, so you should know why we set up 10.20.0.0 this network segment, because we have physical and virtual machines need to communicate, but also confirmed that there is no proxy locally, to confirm the firewall shutdown to successfully log into the fuel interface

If the confirmation is not a problem, then open the browser input 10.20.0.2:8000, will pop up the following screen, this is the web is not loaded complete, wait a moment

After a while, refresh this page, we see the login interface, input admin,admin into