Instance description P settings and switch gateway settings

For constructive instances of IP settings and vswitch gateway settings, let's take a look at the following vswitch gateway setting method, which is not suitable for you. From the instance below, we can see the specific operation steps and its code and other details, if you are interested, try it.

Why do switch gateway settings are required for Inter-CIDR Block switch management? In a vswitch, you can configure an IP address for vlan 1, that is, the management IP address of the vswitch, the configured administrative IP address allows the network administrator to remotely manage the vswitch using telnet or network management software.

For example, you can configure a vswitch gateway on a vswitch.

Workstation pc-01 within the CIDR block of a vswitch can remotely manage the vswitch using telnet, if the user is currently logged on to switch-01, to remotely manage the switch-02 of another CIDR Block through the network, you need to set a default network management on both vswitches, indicating that the data frame that the switch cannot forward will be handed over to the IP address gateway IP address) to complete the data frame forwarding process. The sending process is as follows:

For example, you can configure a vswitch gateway on a vswitch:

IP settings and gateway settings

In the workstation pc-01 can use telnet Remote Management of different CIDR blocks of the switch, generally for the same CIDR Block of the switch management to configure a management IP address on the switch can be, when you want to manage another vswitch from one vswitch to another, you need to configure the vswitch gateway.