Internet Bar Switch Configuration tutorial

In the work of network management, the Internet Café switch configuration must be mastered and skilled, because this is a complex process, for some of the new network management, may also lack of experience. This article specifically explains the Internet Café Switch Configuration tutorial, for reference only.

Different types of switch console ports are located in the same location, the console port type is different, the vast majority of the RJ-45 port, but there are a few DB-9 serial port or DB-25 serial port. Then the next step is to do the following:

Step 1th: Turn on the power of the computer connected to the switch and run the WINDOWS2003 or 2008 operating system on the computer.

Step 2nd: Check to see if the HyperTerminal (HyperTerminal) component is installed. If the component is not found in accessories, you can add the Windows component through Add/Remove Programs (Add/removeprogram).

3rd step: In the Name text box, type the name of the level terminal connection item you want to create a new super. This is mainly for easy identification, no special requirements, we type "XXX" here, if you want to select a favorite icon for this connection, you can also select one in the icon bar of the following diagram, and then click OK Button.

Step 4th: Select the serial port of the computer that is connected to the switch by using the Drop-down list box on connect.