*appicon size
* Not all appicon are required to be configured
* Try not to be transparent-(transparent, will appear on the desktop as background black)
1 If you do not configure the 5s start-up diagram, go back down, find 4s, will be the interface with 4s boot diagram size display, the printed point coordinate system is also 4s
2 If there is no start-up diagram configured 6, will look down, find the 5s figure, the 5s Turada
If you do not configure the 6plus start diagram, and do not configure 6, will also look down, find the 5s figure, the 5s of Tula large, there are 6 of the start diagram, will not show the start diagram (will not look down)
3 the size of the start graph, one pixel can not be poor. Otherwise, it will not be displayed
4 If the user chooses display zoom mode, only 6 and 6plus are available.
If the user turned on with the above situation is not the same, for example, no configuration 5, run at 6, his size is the X 568, No 6, running in Plus, his size is 375 X667 (6 size).
6 will find 5s.
6plus go back to find 6;
iOS Development Project II [APP AppIcon and launch map]