IP Limit settings instance for Helix server

Since the beginning of the Realserver8 era, many people have been searching the Internet for a tutorial on IP restrictions, but mostly ambiguous, or too simple, so that some friends after many failures to give up the public network part of the open and completely into the LAN. In fact, the real streaming media server's IP setting is only the subnet mask and permission order, now the helix has taken the bit form of the subnet mask, very good understanding, so we now focus on the right order.

4, other unauthorized IP is not allowed to access.

To set up a procedure:

1, into the Helixserveradministrator management page, click on the server settings, and then click on the submenu IP binding, in the right Edit IP address window to enter 0.0.0.0, click Apply, click on the top of the restart server on the upper right-hand side to make the change effective (Figure 17).

Note: This allows Helix to use the two IP of this machine at the same time, you should be able to access the following two addresses with the client on the LAN.

rtsp://192.168.0.202/vod2/Shaolin Football/ALL.RMVB

rtsp://220.114.32.108/vod2/Shaolin Football/ALL.RMVB

2, click the security settings, and then click on the submenu access control, see there are two default rules, do not edit them (Figure 18).

Click on +, add a new rule, the right to edit the rule description can be changed to admin (in fact, do not change the name), access type is "Allow", the client IP address or host name input localhost or native IP, customer terminal network mask at the "None", The server IP address or host name is "any", port to fill in your own management port (each installation helix will randomly get a management port, can be found in the server settings in the Port window, in the IE Address bar can also be clear to see (Figure 19), find out their own, Don't hit 25002 of the pictures I gave you!! ), fill in with + next to the up and down arrows to adjust the order to the second, click Application, click on the right top of the restart server, so that the change takes effect, the final result should be as shown in Figure 20

Note: This admin rule is very important, its role is to ensure that this function smoothly into the management interface, no matter what rules to add the first two rules do not move, the last rule can not change the position.