Iphone6 plus signal bad how to do iphone6 plus signal dissatisfaction solution

1, switch flight mode re-search signal

In the daily use of the iphone, occasionally there will be a bad phone signal, for example, in some locations across the base station will often appear signal diving instability. At this point, users can try to switch flight mode, to try to restore the phone signal. How to operate:

The first step is to open the flight mode first. The user can open the flight mode in the control center.

Second step, wait about 5 seconds, then close flight mode.

This helps to solve the problem of bad signal or no signal.

2, hand-selected operators to solve the signal problem

Generally speaking, the iphone will automatically access the corresponding network according to the user's mobile card. But sometimes when the signal is bad, you can not find the mobile phone network situation, you may try to select the network manually. How to operate:

The first step, in the Settings application, click to enter the "operator" option.

The second step, in the Operator Options page, turn off the "automatic" feature.

The third step, which will later show the network operators, users simply according to their own mobile phone card to select the corresponding operator. For example, China Mobile users can choose "China Mobile".

3, resetting the mobile network to solve the signal problem

in trying the above two methods, the cell phone signal is still bad, the user can also try to reset the network settings function. How to:

First step, in the settings application, the General Options page, click to go to the "restore" option.

Step Two, on the Restore Options page, click Restore Network Settings.

Need to remind users that resetting the network settings clears the user's WiFi password.

4, brush recovery system to resolve signal problems

The iphone may have a system problem when the previous approach failed to resolve the iphone signal problem. At this point, you can try the brush machine to restore the system method. The action is as follows:

The first step is to connect the iphone to the computer and run the itunes software. On the itunes page, click on "Back up now" to make a full backup of the iphone.

Step Two, and then click Shift and click "Restore iphone" and select the appropriate firmware to restore the iphone system.

This requires a reminder that you should not forget to back up before you brush the machine. If the brush machine or not, it is recommended to obtain after-sale testing to see what is the reason.