First, preparatory work
1, the original connection data cable (this is very important);
2, choose the computer's best USB interface (such as desktop back-end, and is not loose);
3, turn off the computer screen protection (this is not necessary, but because some password acquisition time is very long, in order to facilitate observation, I personally suggest so);
4, the last is the most important. Be patient (the general time is much greater than the brush machine and jailbreak).
Second, get the starting operation of the power-on password
1, connect the mobile phone to the computer (to ensure that the connection line fastening, as well as the USB interface is not loose), open the assistant;
2. Click on the "senior player" in the "toolbox" of the assistant.
3, click on the right menu in the "Read device power-on password", the assistant display as follows:
4, manual operation, into the DFU mode: in order to obtain the boot password, must enter the device's iOS system kernel, therefore, must ensure that the equipment entered, and always in the DFU mode of the state (into the DFU mode is the altar friends must master the most basic skills, the method of his assistant marked very clear, no longer repeat )!
Third, the process of obtaining the power-on password
Once the device has entered the DFU mode, the assistant immediately starts to "get the power-on password"! The display is as follows:
At the same time, the screen of the mobile phone will immediately appear the white data continues to roll up the display:
Four, get the power-on password successfully completed
In the entire acquisition process, we only need to wait patiently, do not have any operation, the assistant will automatically work for you, finally, the success of the password, the display is as follows:
Hope that the assistant can help you find the IPhone6 unlock password.
