Before using the extender, you need a wireless router (or all-in-one machine) that can access the internet. This is the prerequisite for expansion. As shown in the following figure:
This article introduces how to use notebook computer to operate TL-WA832RE to enhance the wireless signal.
You can also refer to the setting guide video:
Plug the extender into a power outlet in a proper position, and connect the laptop to the wireless signal of the extender. Default extended signal:
TP-LINK_RE_XXXX
Where
XIndicates the last four digits of the MAC address. You can view the MAC address on the extension housing tag.
Note:If the default signal is not found, it may have been set as a relay. Reset the extensioner.
Open the computer browser, clear the address bar, and enter
Tplogin.cn, As follows:
After the browser displays the extended login box, set 6 ~ 15-bit management password. This password will be used to log on to the management extender later. Remember to click
Confirm, As shown in the following figure:
Unable to log on to the extended interface. What should I do?
1
, Setup Wizard
Log on to the extended interface, and click
Next Step, As shown in the following figure:
2
, Scanning signal
Scan for wireless signals and click
Scan, As shown in the following figure.
Find the wireless signal to be expanded in the list, and click
Connection, As shown in the following figure.
Note:In this article, the extension of zhangsan is used as an example. You need to select the signal to be extended.
3
Enter the wireless password for the extended signal
In
KeyEnter the wireless password for the signal to be expanded (that is, the main network), and click
Next Step, As shown in the following figure:
Note:By default, the SSID of the extender is the same as the Wireless name of the primary network.
4
, Set and restart the device
Set up. Click
Restart, As shown in the following figure:
The system prompts that the instance is restarting. Please wait.
Now, the scaling operation settings are complete. Let's confirm that the scaling is successful.
Observe the extended indicator. If it is green or orange, the expansion is successful, as shown below:
Tip: OrangeIt indicates that the expansion device is too close to or too far from the master router. You can adjust the location as appropriate.
In this case, the default signal of the extended router disappears and has become the same as that of the primary router. The Wireless name and password are the same. Your mobile phone can connect to the Internet with the extended signal.
