ISEE fix red eye, low exposure, and color

At present, people have been very accustomed to using digital cameras to record the moment of life. In the process of giving a photo portrait, red eye often appears, excessive exposure or lack of exposure, color and so on. When these problems occur, using ISEE image expert software can easily repair these problems digital photos, pure fool operation, almost no need for any image processing expertise to complete.

Below we will introduce the ISEE picture expert how digital photograph often appears red eye, the exposure is insufficient, the bias color three questions.

One, to the red eye

"Red eye": Usually when people are in the dark or at night, with a flash camera when the eyes often appear a red phenomenon.

(Figure 1)

ISEE Open Figure 1 photo, select "Right Toolbar"-Portrait beauty-go red-eye.

(Figure 2)

Then go to the "Red eye" processing interface, adjust the pen to the female size, mouse click eyes can easily remove red eye.

(Figure 3)

Red Eye--effect comparison chart:

(Figure 4)

Second, the repair exposure is insufficient.

Lack of exposure: generally refers to the amount of light when the photo is insufficient. The following picture is obviously less exposed:

(Figure 5)

ISEE Open Figure 2 photo, select "Right Toolbar"-Photo repair-smart fix-digital fill light.

Click on "Digital Replenishment" 3 times. (according to their own needs, select the number of clicks)

(Figure 6)

Fix exposure-effect comparison chart:

(Figure 7)

Third, to repair the photo color bias.

Partial color: In the process of photographing, due to the ambient light and camera mode of the problem, the photos taken may be biased. As shown in Figure 3, the color of the photo is red.

(Figure 8)

ISEE Open Figure 3 photo, select "Right Toolbar"-Photo repair-smart fix-automatic white balance.

(Figure 9)

Some partial-color photos, when using automatic white balance, may not revert to the normal color. At this time, you can undo the "automatic white balance" function, select the basic correction-white balance point pass.

(Figure 10)

Enter the "White balance point through" processing interface:

(Figure 11)

On the left side of the original image, choose a white balance datum point, that is, select a "White" object in the screen as a white spot, such as Figure 3, you can click on the mouse white clothes. And you can try a few more places until you have a satisfying effect. (Note: If a few clicks, or no satisfactory effect, you can click the interface below the "RGB correction", adjust the "RGB" parameters, until the results of their own satisfaction. )

To fix a color-effect chart comparison:

(Figure 12)

You see, for these often troubled photos of the problem, using ISEE image expert software, mouse click one or two, it is easy to fix. Is it simple?