Hybrid Hybrid Link type ports can receive and send multiple VLANs as well as trunk ports
Data frame, but the difference is that it can also specify a Peel label operation on any frame,
Note: Either access, trunk, or hybrid ports will be docked to any data frame
Add VLAN tags.
Experimental principle: In a two-layer switch if there are two different VLANs need to communicate between, you can
Set the port type to hybrid port on the port corresponding to the two VLAN, and on the port to receive
Another VLAN frame for the Peel label operation.
Note: If communication is required between different VLANs, these different VLANs must be
Between the same network segment, otherwise the destination host is unreachable because the host will first
The target host and the machine are not in the same network segment, the word will be sent to the gateway, the fundamental
No ARP broadcast packets are emitted.
Experimental environment: H3C ENSP
First step: Partitioning VLANs
Step Two: (interface mode) set the port type: Ports Link-type hybrid
Step three: (interface mode) set port pvid:port hy pvid VLAN 10
Fourth step: (interface mode) set the port to peel off this VLAN and the label that requires the communication VLAN
Switch Configuration essentials:
Enter system view, return user view with Ctrl + Z.
[Huawei]dis
[Huawei]display CU
[Huawei]display current-configuration
#
sysname Huawei
#
VLAN Batch 10 20 30
#
Cluster enable
NTDP Enable
NDP enable
#
Drop Illegal-mac Alarm
#
DiffServ domain Default
#
Drop-profile Default
#
Aaa
Authentication-scheme Default
Authorization-scheme Default
Accounting-scheme Default
Domain default
Domain Default_admin
Local-user Admin Password Simple admin
Local-user Admin Service-type http
#
Interface VLANIF1
#
Interface METH0/0/1
#
Interface ETHERNET0/0/1
Port Hybrid Pvid VLAN 10
Port hybrid untagged VLAN 10 30
#
Interface ETHERNET0/0/2
Port hybrid Pvid VLAN 20
Port hybrid untagged VLAN 20 30
#
Interface ETHERNET0/0/3
Port Hybrid Pvid VLAN 30
Port hybrid untagged VLAN 10 20 30
#
Interface ETHERNET0/0/4
#
Interface ETHERNET0/0/5
#
Interface ETHERNET0/0/6
#
Interface ETHERNET0/0/7
#
Interface ETHERNET0/0/8
#
Interface ETHERNET0/0/9
#
Interface ETHERNET0/0/10
#
Interface ETHERNET0/0/11
#
Interface ETHERNET0/0/12
#
Interface ETHERNET0/0/13
#
Interface ETHERNET0/0/14
#
Interface ETHERNET0/0/15
#
Interface ETHERNET0/0/16
#
Interface ETHERNET0/0/17
#
Interface ETHERNET0/0/18
#
Interface Ethernet0/0/19
#
Interface ETHERNET0/0/20
#
Interface ETHERNET0/0/21
#
Interface ETHERNET0/0/22
#
Interface GIGABITETHERNET0/0/1
#
Interface GIGABITETHERNET0/0/2
#
Interface NULL0
#
User-interface Con 0
User-interface vty 0 4
#
Port-group Hybrid
#
Return
[Huawei]
Test diagram:
Key points and examples of hybrid link type configuration