With the widespread use of wireless networks, the problem that laptops cannot connect to tengda vro is also plagued by small network faults when enjoying the convenience and convenience of wireless networks, what we want to introduce today is the solution to the failure of wireless connection between the tengda router and the computer. 1. vro 1. log on to the vro to check whether the wireless routing function is enabled. Click Wireless settings in the left-side Navigation Pane. The Wireless Settings page is displayed on the right, make sure that the wireless feature of the wireless router is enabled and the SSID broadcast is allowed.
2. Try to put the vro and the notebook together to see if the wireless signal can be found to avoid serious signal attenuation due to too many obstacles. If the signal still cannot be found, check whether other wireless network adapters can connect to the vro. If none of them are available, restore the router to the factory settings.
2. Laptop www.2cto.com 1. If you are using a wireless network card built into your laptop, check that the wireless function switch is enabled. If you are not clear about the switch, check the manual. 2. In the Device Manager, check whether the wireless NIC Driver is successfully installed and whether the wireless Nic is enabled. Right-click my computer on the desktop and choose Properties-hardware-Device Manager.
In the red box, the NIC Driver is successfully installed and enabled.
3. Check whether the wireless service of the notebook is enabled. Here, we use the XP system as an example. Right-click my computer on the desktop and choose manage. In computer management, select services and applications, check the status of the Wireless Zero Configuration on the service page. The Configuration is enabled.
After the above steps, you can solve the problem that the wireless network cannot be connected.
This article is from