Laptop hard drive broken how to fix it?

laptop hard drive broken how to fix it?

Every new hard drive is more or less bad, but they are hidden in the P table and the G table, we can not access it with the general software. G table, also known as user-level list, can store about hundreds of to 1000 bad way; The P table, also known as the factory level list, can store around 4000 bad or more.

Now, let's look at the various troubleshooting methods on the hard drive.

Method A general Problem general fix

1, hard disk is often the phenomenon of the boot or run easily blue screen, but still can enter the system. This problem is generally easy to repair, mainly the system partition problem. We open the DOS Command Prompt window and enter the command "CHKDSK c:/f/r/x" for a forced FIX:

2, because it is the repair system partition, need to reboot the computer to repair.

3, individual small problem, can also use some repair software repair success. It is recommended that you try it first with Diskgenius. To avoid miscalculation, it is recommended that you first perform check partition table errors on the Tools menu:

4, if not repaired, then the "hard Drive" menu of "bad track detection and repair" function.

5, if the boot process in the hard disk, then there is no need for all detection and repair, otherwise it will be very long. Once set, you can start detection and try to fix it.

6, more stringent focus on the problem, you can use more specialized tools to detect, if the best repair.

Method Two serious problem low lattice repair

1, the more common notebook hard drive bad may be in the case of the shutdown is taken to bring the disk header information damage. If 0 information is corrupted, the lower grid is available. For example, we use DM software for low lattice.

2, start DM after the default is not low grid, you need to open the Advanced menu to perform the low lattice. In the DM's main interface, press "ALT+M" to switch to the Advanced menu, select the Menu "(M) aintenance Options" command to enter the Advanced menu.

3, then select the "(U) tilities" entry, into the low-level format of the interface.

4, then DM will show the list of found hard drive, select the hard drive you want to operate, and press ENTER. This step is extremely important and must not be chosen incorrectly. If you have only one hard drive to enter directly.

5, select the hard disk, and then select "Low level format" for low-level format.

6, then will pop-up warning window, press "ALT+C" confirm after continue.

7, after the confirmation, will also pop-up let you reconfirm the window, select "YES".

8, confirm the beginning of the hard drive low-level format operation, and there will be a detailed percentage progress display.

9, low lattice operation will take a long time, it is recommended to go to bed before going to sleep, let it automatically execute on the line.

10, in addition, many notebook hard drive is broken, can not be used to install the system, then do not lose heart, because the notebook hard disk is very small, so you can buy a mobile hard disk box, used when the mobile hard disk must be.