Article word limit, divided into three articles:
Laser projection POV (upper) (2015-10-01)
Laser projection POV (mid) (2015-10-01)
Laser projection POV (bottom) (2015-10-01)
- Mounting Mirrors
- Installing Photoresistors
If the appropriate mechanical structure is to be made to adjust the activity, so that you can control the display range, can be adjusted according to the length of the display content.
- Connect with the circuit.
Originally using UNO, but in order to facilitate the operation of a group of 8 laser tubes, need to use an entire port, UNO only a full port pin0-pin7 = = PORTD, but also use two external interrupts, so please come to Mega2560 ...
- Welding Function Board
After the breadboard test, the welding circuit is fixed.
- The machine is installed well
- Operation: Light and light off effect
Default display Logo:seesea, a little narcissistic ah.
- Support Serial Word modification
Serial port support, the equivalent of support for Bluetooth and WiFi and other convenient interface.
ARDUINOCN:
(article word limit, to be divided into chapters continue)
Laser projection POV (mid) (2015-10-01)
