Latest all-around DOS boot disk Creation Strategy (floppy disk + CD + USB disk + hard disk + NTFS + Emergency utility)

Source: Internet
Author: User

First, describe how the various operating systems start to DOS:

WIN9x system: Press F8 after the system is started, and press enter for the first item to enter the basic dos7.x environment that comes with the system.
2 K/XP/2003: the system does not have a built-in DOS, And the DOS environment needs to be obtained through the DOS boot disk or virtual soft drive.

This article describes how to create four DOS boot disks. The basic program files that exist in the four boot disks are described as follows:

ATTRIB. EXE file attribute modification tool.
AUTOEXEC. BAT automatically executes batch processing when it is started.
CONFIG. SYS system configuration file.
DELTREE. EXE deletes directories and embedded files.
DI1000DD. sys usb device driver.
DOSKEY. com doskey is a convenient command line tool.
EDIT. COM text editing tool.
EMM386.EXE memory driver.
FDISK. EXE 98SE built-in partition tool.
FDISK-ME.exe WinME built-in partition tool, support 60 GB or above hard disk.
FORMAT. COM formatting tool.
HIMEM. SYS memory driver.
JMHDFIX. EXE Jiangmin hard drive repair Wang, Hard Drive repair good stuff, new users use with caution.
The tool used to access and exit the directory by using the following command.
MOUSE driver for MOUSE. com ps/2 and Serial interface.
MSCDEX. EXE optical drive management program.
The general drive of the OAKCDROM. SYS Optical Drive.
PC. exe pctools.
R.com restart tool.
SCANDISK. EXE disk scan tool, used to fix some disk problems.
SMARTDRV. EXE disk high-speed buffer.
SYS. COM transmission system.
USBASPI. sys usb driver.
XCOPY. exe xcopy file directory copy tool.

I. DOS boot disk for a floppy disk

Intended audience: 1.44 MB 3.5in soft drive friends.

A. Supports memory management of himem and emm386, which can break the limit of KB of common dos Memory.
B, can drive a variety of common types of optical drive (CDROM, DVD-ROM ).
C. Support for smartdrv disk buffer acceleration, which greatly speeds up disk read/write in DOS, especially when installing the system in DOS or using a GHOST image file, which saves you a lot of time.
D. Recognize the USB flash drive and automatically assign a drive letter to it.
E. automatically load the mouse driver.

:

Http://nnmm.arongsoft.com/dos/dosbootV1104.exe

Http://nnmm.arongsoft.net/dos/dosbootV1104.exe

Procedure:

1. After the download, insert a floppy disk into the floppy disk and run the program. It automatically creates a DOS boot disk with the above functions.
2. Insert the floppy disk into the soft drive, restart the computer, and press the Del key on the system self-check interface to enter the BIOS settings (if it is a special BIOS, please refer to the motherboard manual to determine which key to press to enter BIOS), enter bios features setup, set Boot Sequence (Boot Sequence) to disk A first, the setting method is to press the PageUP or PageDown key on the item to convert the options. After setting, click ESC, return to the main BIOS interface, and select Save and Exit (Save and Exit the BIOS settings. Press F10 directly, but not all BIOS support) press enter to exit the BIOS settings.
3. After the system is restarted, the DOS system is automatically guided from the soft drive. The Boot menu has three options,
Boot dos with cdrom is a drive,
Boot dos with cdrom + usb drive and usb drive,
Boot dos only starts dos and loads memory management and smartdrv cache.
Use the restart key to select the desired start mode. Press enter to confirm. Note that if you select the boot dos with cdrom + usb option, it will take a long time (1-2 minutes) to scan the usb device during startup ), please wait.
4. After the startup is SUCCESSFUL, the dos loading successful is displayed at the: \> prompt. Now that the DOS system is started, you can do what you should do now.
Note: Use a good-quality floppy disk as the boot disk to keep the disk running normally.

Ii. DOS boot disk for Optical Disk

Intended audience: friends who do not have a software drive but have an optical drive (recorder) (friends who do not like it ).

A. Supports memory management of himem and emm386, which can break the limit of KB of common dos Memory.
B, can drive a variety of common types of optical drive (CDROM, DVD-ROM ).
C. Support for smartdrv disk buffer acceleration, which greatly speeds up disk read/write in DOS, especially when installing the system in DOS or using a GHOST image file, which saves you a lot of time.
D. Recognize the USB flash drive and automatically assign a drive letter to it.
E. You can select whether NTFS partitions are supported.
F. automatically load the mouse driver.

:

Http://nnmm.arongsoft.com/dos/dos-cdromboot-v1104.ima

Http://nnmm.arongsoft.net/dos/dos-cdromboot-v1104.ima

Procedure:

1. Enable the recording software nero, select "CDROM-Boot" from the select disc type, and select "Image File" from "start". in browse, select the downloaded ima file and click New To Go To The nero interface.
2. If you only want to have basic dos functions and do not need to perform operations on NTFS partitions, skip this section and check 3rd. If you want to have more powerful dos functions, download the following compressed package:

Http://nnmm.arongsoft.com/dos/dosappV1104.rar

Http://nnmm.arongsoft.net/dos/dosappV1104.rar

The package contains the following content:

DM955 dm universal edition 9.55, commonly used tool for partitioning and hard disk repair, the execution file: dm.com.
DOS is the most commonly used dos External commands and some dos tools to maximize your DOS functions.
HDFIX Jiang Min's hard disk repair king, a powerful tool for hard disk repair, used with caution by cainiao, the execution file: jmhdfix.exe.
Select the GHOST for each DOS version of GHOST.
NDD2004 Norton disk doctor 2004 dos + win 2-in-1 version, used to fix hard disk problems, dos execution file: ndd.exe, windows execution file: Ndd32.exe.
NTFS can read and write NTFS partitions under dos. It is applicable to anti-virus software running dos and data backed up by ntfs partitions. the executable file is ntfspro.exe.
PQ805 version 8.05 of the latest pqmagic, a powerful tool for partitioning under dos, supports a large hard drive of more than GB, the executable file: pqmagic.exe.
UCDOS ucdos98 pocket Special Edition, including CCED5.18 and WPS2.0, comes with Pinyin and five-stroke input methods, Alt + F2 start Pinyin input method, Alt + F5 start five-stroke input method, Right Shift key is the Chinese and English input method switch, start ucdos: u. bat, start cced: cced.exe, and start wps: wps.com.
After downloading this package, decompress it to the hard disk, add it to the burned content in nero, make it into the boot disc, and convert it to the disc drive letter in dos, enter the corresponding directory and execute the corresponding program.
3. Start to burn the disc. After that, you will have a dos disc that can start the system.
4. Put the disc into the optical drive, restart the computer, and press the Del key on the system self-check interface to enter BIOS settings (if it is a special BIOS, please refer to the motherboard manual to determine which key to press to enter BIOS), enter bios features setup, set Boot Sequence (Boot Sequence) to CDROM first, the setting method is to press the PageUP or PageDown key on the item to convert the options. After setting, click ESC, return to the main BIOS interface, and select Save and Exit (Save and Exit the BIOS settings. Press F10 directly, but not all BIOS support) press enter to exit the BIOS settings.
3. After the system is restarted, the DOS system will be automatically guided from the optical drive. The Boot menu has three options,
Boot dos with cdrom is a drive,
Boot dos with cdrom + usb drive and usb drive,
Boot dos only starts dos and loads memory management and smartdrv cache.

Use the restart key to select the desired start mode. Press enter to confirm. Note that if you select the boot dos with cdrom + usb option, it will take a long time (1-2 minutes) to scan the usb device during startup ), please wait.
4. After the startup is SUCCESSFUL, the dos loading successful is displayed at the: \> prompt. Now that the DOS system is started, you can do what you should do now.
Note: We recommend that you use a CDRW disk to create a boot disk. you can replace it with any version updates in the future. You can also burn some commonly used dos tools to this disc for ease of use.

Iii. USB flash drive DOS boot disk

Intended audience: friends who do not have a disk drive or a USB flash drive (friends who are confused about the hard drive ).

A. Supports memory management of himem and emm386, which can break the limit of KB of common dos Memory.
B, can drive a variety of common types of optical drive (CDROM, DVD-ROM ).
C. Support for smartdrv disk buffer acceleration, which greatly speeds up disk read/write in DOS, especially when installing the system in DOS or using a GHOST image file, which saves you a lot of time.
D. Recognize the USB flash drive and automatically assign a drive letter to it.
E. You can select whether NTFS partitions are supported.
F. automatically load the mouse driver.
1. download the following USB flash drive creation tool:

Http://nnmm.arongsoft.com/dos/usboot.rar

Http://nnmm.arongsoft.net/dos/usboot.rar

After downloading, you can use it to make your USB flash drive into a DOS boot type. When selecting "work mode", you must select HDD mode and follow the prompts of the tool to make it successful.
2. download the following rar compressed package and release the file to the root directory of the USB flash drive. Note that it is the root directory! If you do not need to support NTFS partitions or other dos tools, skip step 3 and go directly to step 4.

:

Http://nnmm.arongsoft.com/dos/dos-usboot-v1104.rar

Http://nnmm.arongsoft.net/dos/dos-usboot-v1104.rar

3. download the following packages and release them to the USB flash drive:

Http://nnmm.arongsoft.com/dos/dosappV1104.rar

Http://nnmm.arongsoft.net/dos/dosappV1104.rar

The package contains the following content:
DM955 dm universal edition 9.55, commonly used tool for partitioning and hard disk repair, the execution file: dm.com.
DOS is the most commonly used dos External commands and some dos tools to maximize your DOS functions.
HDFIX Jiang Min's hard disk repair king, a powerful tool for hard disk repair, used with caution by cainiao, the execution file: jmhdfix.exe.
Select the GHOST for each DOS version of GHOST.
NDD2004 Norton disk doctor 2004 dos + win 2-in-1 version, used to fix hard disk problems, dos execution file: ndd.exe, windows execution file: Ndd32.exe.
NTFS can read and write NTFS partitions under dos. It is applicable to anti-virus software running dos and data backed up by ntfs partitions. the executable file is ntfspro.exe.
PQ805 version 8.05 of the latest pqmagic, a powerful tool for partitioning under dos, supports a large hard drive of more than GB, the executable file: pqmagic.exe.
UCDOS ucdos98 pocket Special Edition, including CCED5.18 and WPS2.0, comes with Pinyin and five-stroke input methods, Alt + F2 start Pinyin input method, Alt + F5 start five-stroke input method, Right Shift key is the Chinese and English input method switch, start ucdos: u. bat, start cced: cced.exe, and start wps: wps.com.
Go to the corresponding directory and execute the corresponding program.
4. Now, you have a USB flash drive that can start the DOS system.
5. Insert the USB flash drive into the USB port (it is best to temporarily unplug other USB devices), restart the computer, and press the Del key on the system self-check interface to enter the BIOS settings (if it is a special BIOS, refer to the motherboard manual to determine which key to press to enter BIOS), enter bios features setup, set Boot Sequence (Boot Sequence) to USB-HDD first, the setting method is to press the PageUP or PageDown key on the item to convert the options. After setting, click ESC, return to the main BIOS interface, and select Save and Exit (Save and Exit the BIOS settings. Press F10 directly, but not all BIOS support) press enter to exit the BIOS settings.
6. After the system is restarted, the system will automatically boot the DOS system from the USB flash drive. The Boot menu has three options:
Boot dos with cdrom is a drive,
Boot dos with cdrom + usb drive and usb drive,
Boot dos only starts dos and loads memory management and smartdrv cache.
Use the restart key to select the desired start mode. Press enter to confirm. Note that if you select the boot dos with cdrom + usb option, it will take a long time (1-2 minutes) to scan the usb device during startup ), please wait.
7. After the startup is SUCCESSFUL, the dos loading successful is displayed at the: \> prompt. Now that the DOS system is started, you can do what you should do now.
Note: Back up the original data on the USB flash disk before making the boot disk. It is best to format the USB flash disk completely.

4. Hard Disk DOS Startup

Target Audience: friends who do not have a soft drive, USB flash drive, recorder, or optical drive (friends who like speed ).

Method 1: If your c disk is in the FAT32 format before the new system is installed (2 K/XP/2003), you can use the dos boot disk to start the system and run the sys c: Command, transfer the dos system file to drive C, and then install 2 K/XP/2003 (note that the partition format of drive C is not changed during installation). After windows is installed, after the instance is restarted, two startup options will appear, asking you to choose whether to start 2 K/XP/2003 or Microsoft Windows (dos). Press enter to select the ↑ ↓ key and press enter to confirm.

Method 2: If you have installed 2 K/XP/2003 or the system disk is in NTFS format, but want to install dos again, you can modify some system files, but it is troublesome. Here we recommend the following simple method:

A. Supports memory management of himem and emm386, which can break the limit of KB of common dos Memory.
B, can drive a variety of common types of optical drive (CDROM, DVD-ROM ).
C. Support for smartdrv disk buffer acceleration, which greatly speeds up disk read/write in DOS, especially when installing the system in DOS or using a GHOST image file, which saves you a lot of time.
D. Recognize the USB flash drive and automatically assign a drive letter to it.
E. You can select whether NTFS partitions are supported.
F. automatically load the mouse driver.

1. Download The vfloopycompressed package of this tool, uncompress it to a hard disk, run vfloopy.exe in it, and select the NTFS file included in the compressed package in the "Image File" column. IMG, other do not need to change, directly click the "application" button, OK, and then the software will ask you to restart the system.

Http://nnmm.arongsoft.com/dos/VFloopy-ntfs-v1104.rar

Http://nnmm.arongsoft.net/dos/VFloopy-ntfs-v1104.rar

2. After the system is restarted, before entering 2 K/XP/2003, the boot menu will have an additional option "start from virtual boot floppy disk", which is the option to start to DOS, select it and press enter to enter the DOS menu. The meaning of the DOS menu is as follows:

Boot DOS with CDROM-drive Optical Drive
Boot DOS with CDROM + USB-drive optical drive and USB flash drive
Boot DOS with CDROM + NTFS-Drive drive and NTFS partition supported
Boot dos only-ONLY start DOS and load memory management and smartdrv cache.

Use the restart key to select the desired start mode. Press enter to confirm. Note that if you select the Boot DOS with CDROM + USB option, it will take a long time (1-2 minutes) to scan the USB device during startup ), please wait.
After selecting Boot DOS with CDROM + NTFS, the NTFS read/write tool will be automatically loaded. In this way, the NTFS partition can be operated under DOS, which makes sense to special users.
3. At this point, the hard disk version of DOS boot has been successfully created. As long as you do not reinstall the system or format the system disk, this DOS boot menu will always exist.
Note: Do not use the sys command to transmit the system to the system disk. This will damage the system boot information.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.