Learn network 9--OSPF via Cisco emulator Cisco PACKET Tracer

RIP protocols can be configured in a more convenient way, but the limitations of RIP itself indicate that it is not suitable for medium to large networks. In contrast, OSPF is more complex to configure than RIP, but its functionality and performance are better than RIP.

Configuration ideas

1 Configure the physical interface address of the router Xia Lian switch and the physical interface address of the router to the other router and open the port

2 Configure the address of the switch Xia Lian PC and set the address of the gateway to the physical interface of the router xia Lian switch

3 Another router is also connected to the switch, and the IP address and the PC are in the same network segment

4 Turn on the OSPF function of the router, specify the process name and declare the network segment itself and define the area number

The network topology diagram is as follows

1 Configuring the Router interface address

2 Configuring the PC address

3 Configuring the OSPF protocol for the router

4 similar to other router configurations

5 Viewing route entries

6 Validation actions

Learn network 9--OSPF via Cisco emulator Cisco PACKET Tracer