Learn how to install a vro to start your network journey

Today, I would like to introduce you to the logon and main interface of the router installation diagram. There are many textbooks on the Internet, which are difficult for many people who do not have a basic network. Therefore, these friends can easily install the vro through illustrations.

Router installation Diagram

Open IE browser, enter 192.168.1.1 in the address bar, and press enter to view the login interface of the router. You must log on as an administrator. 1 ). The default settings of the factory device can be found in the Manual. D In the login interface enter the default user name and password TP-LINK router default settings are Admin), and then click OK to enter the Wireless Settings interface, the following is how to set according to your own requirements.

Figure 1 router installation Diagram
Internet access

To use a vro to share the internet, you must first inform the vro of the current Internet access method. Select "network parameters> WAN Port Settings" on the left side of the vro settings window, and select your preferred Internet access method from the "WAN port connection type" menu. 3 ). If your Internet access method is ADSL virtual dialing, select "PPPoE". If you have a fixed IP address provided by the network service provider, select "static IP Address ". If you are a residential broadband user like D, such as Great Wall broadband, telecom LAN, etc.), every time you log on to the Internet, the IP address is automatically obtained from the network server, you must select "Dynamic IP ".

Other information, including the subnet mask, DNS server, and gateway, can be obtained by consulting the network server when installing the bandwidth. Because small D selects a dynamic IP address, the router automatically obtains information such as the DNS server and gateway, saving the trouble of small D settings. Of course, you still need to set the DNS server, Gateway information, and subnet mask on each connected computer.

Wireless Settings

In the router installation diagram, wireless setting is the core of the entire wireless router setting. All the options for wireless connection must be set here. Click "Wireless Settings" on the left side of the vro settings window to go to the settings page.