Learn how to set up a 3G wireless network card so that you don't renew it

Do you want to enjoy wireless Internet access? Do you want to become a fashion wireless guru? Why? Why? Isn't the 3G wireless network adapter set yet? Prepare your wireless network card and follow me to learn how to configure it. After reading this article, you are no longer a newbie who will not set the network card!

Preparations for configuring 3G wireless network card

1. Install the client software on the PC.

Remove the back cover of the EVDO terminal device card and insert the uimcard into the EVDO terminal device card (ensure that the card you are using can be fully embedded ).

The device card of the EVDO terminal connects to the PC through a USB plug-in.

The installer runs automatically. The welcome page is displayed. Follow the prompts to complete the installation wizard.

1. After the EVDO HbA card is inserted, the welcome page is displayed automatically. Click Yes, and then click Next;

2. Click Next to start the installer. This process may take several minutes depending on your computer. Please be patient.

Install and use the 3G wireless network adapter

1. Double-click the icon

2. log on to the wireless broadband client and go to the main interface of the wireless broadband client.

3. Depending on the network signal strength, you can select any of the three Connection Methods for dial-up connections.

Click the "Network Connection" button. The procedure is as follows:

Access to wireless broadband (WLAN) after 3G wireless network adapter is configured

Click the connection button in. Pay attention to the following points when using wireless broadband (WLAN) access:

First, you can use a built-in or external WLAN device in your computer to automatically search for a wireless broadband (WLAN) network (ChinaNet (case sensitive) through a wireless broadband client) the name of a wireless broadband network ). Enable the wireless broadband (WLAN) function when the customer handles wireless broadband.

Second, the client software is configured with the wireless broadband (WLAN) access account and password (if not configured in advance, the user will be prompted during the connection ). You can set the WLAN Access account and password as follows: when you start a wireless broadband client, choose Settings> Internet account settings> wireless broadband (WLAN) account settings, enter the correct account name and password, select "Liaoning" for the province where the account is opened, and click "save" to complete the settings. As shown in:

After the connection is successful, if you want to disconnect, return to the dial-up connection page or click disconnect on the network status page.

Wireless Broadband (3G) Access

Click the wireless broadband (3G) connection button on the main interface to connect to the wireless broadband (3G) network. If the connection fails, you can try to use other wireless broadband methods for dial-up access.

When your connection to the wireless broadband (3G) network, if the wireless broadband (3G) signal is too low, it will automatically switch to the wireless broadband (1X) network connection, you can continue to use the internet service.

During the connection, click Cancel to cancel the connection. To disconnect, return to the dial-up connection page or click disconnect on the network status page.

Wireless Broadband (1X) Access

Click the wireless broadband (1X) connection button on the main interface to connect to the wireless broadband (1X) network. If the connection fails, you can try to use other wireless broadband methods for dial-up access.

During the connection, click Cancel to cancel the connection. To disconnect, return to the dial-up connection page or click disconnect on the network status page.