1, the output from the ADSL cable, plug into the LEI branch router Wan, and with a network cable to connect the router and a normal use of the computer, turn on the router power.
Open Network Neighborhood on computer--Properties--Local connection--attribute--TCP/IP protocol--property, set local IP address to 192.168.1.100, gateway to 192.168.1.1 (router side with instructions), subnet mask 255.255.255.0. Open the browser, in the Address bar to enter the router's administrative address (this address can be obtained from the router's instructions) 192.168.1.1, enter the default admin username and password Guest for admin mode login.
Into the route, you can see the current router's working status, the Settings Wizard can be skipped, you can read the script.
ADSL here Choose PPPoE
Fill in your ADSL account password, click Next, complete
Back to the router management of the home page, click on the connection for ADSL connection work,
If the connection succeeds, the word "connect" in the middle will become "disconnected"
Let's set the basic parameters for the next router (using the default, you can not modify it)
Select the WAN Port Settings tab, where you can set up the connection mode in detail, select the automatic connection, and avoid automatic disconnection.
Set up a DHCP server
The computer that connects the router is all turned on, the IP address is set to automatically obtain in the network setup
Network Neighborhood--attributes--Local connection--attribute--TCP/IP protocol--attribute
So you don't have to dial it.