Lenovo IdeaPad Yoga 11 How to make a one-key recovery system

First, do not enter the need for > Backup Data to the service station for recovery.

Second, access to the system will require > backup Data to continue the following steps to restore.

Because Windows RT does not associate with a key recovery, you need to recover from the factory need to use the Windows RT System Recovery System.

Third, the first way of recovery system:

1. Use the mouse to click on the top right corner of the screen or lower right corner;

2. Click the "Settings" button in the right Super button;

3. Click on the "Power" button;

4. You need to press and hold the "Shift" button on the keyboard and click Reboot;

5. Hold down the "Shift" button and click "Reboot"

6. Please wait a moment;

7. Click "Troubleshoot";

8. Click "Initialize Computer";

9. Click "Next", this operation will delete all personal files and applications, and restore the computer settings to the default settings;

10. Computer Black screen display "is preparing";

11. Select "All drives", which will remove the contents of all disks, including the C disk. D ..., if you click on "Install only Windows Drive" will only clear the system disk content;

12. Click "Clean Drive completely", this will erase all personal files and applications, and restore all settings to the default settings;

13. Click "Initialize", please note careful click, click "Initialize" will not exit, and all personal files and applications, all settings revert to the default settings;

Note: Please back up the important data on your hard disk before you restore the system operation to avoid data loss!

14. Start the recovery process, the whole process will be very long, please wait patiently;

15. Reset the computer after the recovery is complete;

Select the country area. Language. Keyboard layout "Then click" Next "button;

16. The "License Terms" page appears;

The first step: in "I accept the relevant ..." place tick;

Step Two: Click the "Accept" button.

17. The "Personalization" Settings page appears;

The first step: choose your favorite color;

Step Two: Enter "computer name";

Step three: Click "Next" button.

18. The "Wireless" page appears;

You can select a wireless connection, or you can click "Connect to a wireless network later."

19. The "Log on to Computer" page appears;

It is recommended that you choose not to log on using Microsoft accounts.

20. Click on the "Local account" button;

21. "Log on to the computer" page;

The first step: "username" must be entered, password optional input settings;

Step two: When finished, click the "Finish" button.

22. The computer automatically prepares the computer for the work;

We just have to wait for the computer to run itself.

23. Restoration completed.

Four, the second way to enter the system recovery:

1. Use the mouse to click on the top right corner of the screen or lower right corner;

2. Click the Set button;

3. Click to change the computer settings;

4. Click on the left side of the general button;

5. Locate the "Remove all content and reinstall Windows" on the right, and click the "Start" button below;

6. Click "Next" button;

7. Please be prepared at a later date;

8. Select "All drives", which will remove the contents of all disks, including the C disk. D ..., if you click on "Install only Windows Drive" will only clear the system disk content;

9. Click "Clean Drive completely", this will erase all personal files and applications, and restore all settings to the default settings;

10. Click the "Initialization" button, please pay attention to carefully click, click "Initialization" will not exit, and all personal files and applications, all settings revert to the default settings;

11. From here, the following steps are the same as the 14th step described in the first method, please refer to the above procedure.

Note: If the interface appears during the recovery process, click Skip "This Drive".

This behavior should occur when the computer's account is restored to the Microsoft account, and click Skip "This Drive".