Y480 is Lenovo a highly cost-effective game audio-visual book, especially students to start quite a lot, and its performance really let people very satisfied, the following say our machine problem, have a lot of friends are looking for Y480, but small series of search for half a day only the friends will release a few pieces of disassembly diagram, turn on a few , personal feeling help is not very big, you are welcome to say is very easy to mislead, Y480 design can be said to do is very in place, only the motherboard removed to give the fan dust, and now Lenovo Clear Ash also began to charge, but also expensive, OK, nonsense not to say, we look carefully oh, especially a lot of details to pay attention to.
First, a small piece of the book to be demolished, demolition tools a head of the Phillips screwdriver on the line.
The most detailed disassembly tutorial in the history of Y480
The first step we have to do is to remove the battery first, this step is very important to say that the house when the demolition power, damage to the hardware.
The most detailed disassembly tutorial in the history of Y480
The second step is, of course, to remove the largest back plate on the back, there are two screws, it is easy to handle.
The most detailed disassembly tutorial in the history of Y480
At this time we can very clearly see the inside of the hard disk, CD-ROM, memory, and so on, we first from the best demolition, CD-ROM drive only a screw fixed, remove the screws, the outside a take off on the finish.
The most detailed disassembly tutorial in the history of Y480
Then the hard drive inside, up and down each has a screw fixed, a long and a short, removed, we can take the hard disk last black plastic strip out, and then lightly to mention, the hard drive can be removed.
The most detailed disassembly tutorial in the history of Y480
Here we do not hurry to dismantle the keyboard, first of all the screws on the D side are removed and then again, because small knitting machine when small series note that the CD-ROM drive bit of the screw is also fixed the keyboard, may be we will be the optical drive off, so did not notice, it is necessary to note that we can see the screws are removed, The total is three kinds of screws! This must be noted, respectively, is the D-side of the ordinary screws, and then the optical drive position of the four small round cake-like screws, and is the battery position of the six with small round cake-like screws, slightly larger than the CD-ROM, this is believed to be easily overlooked, resulting in the demolition of the C surface always feel something connected, Thought is a dark buckle, a the tragedy, very pit dad said.
The most detailed disassembly tutorial in the history of Y480
After the screws have been torn down, we can disassemble the keyboard, the small part suggests that from the top of the F12 button, with a word screwdriver, gently one, the keyboard of the dark button was provoked, and then we will go down the line, in the F3 button position, there is a dark buckle very close, so that the point will see a little bit of C-plane deformation trend, in fact, do not worry, It's easy to drop the keyboard down. Here need attention, the keyboard is in the middle of the line is not too hard, the keyboard is torn down, we can see the line of the button to pull out of the next one, it is easy to tear down, easily said, at this time we can see the fan and other parts.
The most detailed disassembly tutorial in the history of Y480
At this time is not feel that the C side, then I tell you this is a big misunderstanding, you want to really demolition, you will find that he has something fixed it, can not be torn down, and is definitely not a dark button, this is not mentioned in all tutorials!
The most detailed disassembly tutorial in the history of Y480
That is the C side also has a screw fixed, is covered by a warranty label! Easily overlooked, it is located in the position of the F9 button below the location, affixed with a Lenovo warranty label, remove it we can be successfully removed from the C side, but still need to note that the power button underneath a line, Touch board a line is to be removed, gently push on the line, this is easy, even if forgotten will not have too much impact, because we are to take the C side, the area of the line itself disconnected.
The most detailed disassembly tutorial in the history of Y480
The C-side did dismantle the screws, only the dark clasp was connected, even if we do not too careless to say that the small part of the proposal to nail the first side, and then follow a direction, slowly break the dark buckle, not too hard good, if a direction can not move, change a direction.
The most detailed disassembly tutorial in the history of Y480
At this time there is a motherboard, only one screw and a few lines connected, here should be very careful, especially the line, check their own inspection, and then we can take down the motherboard.
The most detailed disassembly tutorial in the history of Y480
When the motherboard is taken down, we unplug the fan and a few screws are removed to get the fan down, so we can wash the fan and add some oil.
The most detailed disassembly tutorial in the history of Y480
Okay, so this is the most detailed disassembly tutorial in the history of Y480, small make up here to remind everyone when, if feel oneself can not dismantle words, best send Lenovo customer service, try not to find a shop clear ash to go, small make friends is, figure easy to send to a computer repair shop clear ash, oneself also didn't look, Small weave in the dust when found in the upper right corner of the C side of the screw fixed column to the province broke up, now found that there is no reason to say to go, so that either their own demolition, or go to a regular point of the place, is the figure of rest assured that interested friends can refer to this tutorial their own demolition machine try Oh.