Linux hardware clock and system clock settings

Source: Internet
Author: User
Tags set time

The Linux clock is divided into the system clock and the hardware clock (Real time clock, referred to as RTC). The system clock is the clock in the current Linux kernel, while the hardware clock is the battery-powered clock on the motherboard and the hardware clock can be set in the BIOS. When Linux starts, the system clock reads the settings of the hardware clock, and the system clock operates independently of the hardware clock.


The Linux shell command for time settings has date and hwclock two kinds:

Linux time settings in the embedded s3c6410 arm Development Board:

1. Date--used to read or set the system time

If the current system is set to a time of 2015/01/05 15:44:44

# date-s "2015-01-05 15:44:44"

2. Hwclock--used to read or set hardware time

# hwclock-s synchronizing hardware time to System time

# Hwclock-w synchronizing system time to hardware time


General Linux system Time settings:

All commands in Linux, including functions, are the system clock settings used. In Linux, the commands for clock viewing and setting are mainly date, Hwclock.

1. Date

Name: Date

Usage rights: All users

How to use:

Date [-u] [-D DATESTR] [-S datestr] [--UTC] [--universal] [--DATE=DATESTR] [--SET=DATESTR] [--help] [--version] [+format] [MMDDHHMM[[CC]YY][.SS]]

Description

Date can be used to display or set the system's Day and time, in terms of display, the user can set the format to be displayed, the format is set to a plus sign followed by a number of tags, where the list of available tags is as follows:

In terms of time:

%: Printed%

%n: Next line

%t: Jump Grid

%H: Hours (00-23)

%I: Hours (01-12)

%k: Hours (0-23)

%l: Hours (1-12)

%M: minutes (00-59)

%p: Show local AM or PM

%r: Direct Display time (12-hour format, HH:MM:SS [ap]m)

%s: Number of seconds from January 1, 1970 00:00:00 UTC to date

%s: Seconds (00-60)

%T: Direct Display time (24-hour system)

%x: Equivalent to%h:%m:%s

%Z: Show Time zone

Date aspects:

%a: Day of the Week (SUN-SAT)

%A: Day of the Week (Sunday-saturday)

%b: Month (JAN-DEC)

%B: Month (january-december)

%c: Display date and time directly

%d: Day (01-31)

%d: Show date directly (MM/DD/YY)

%h: With%b

%j: The first day of the Year (001-366)

%m: Month (01-12)

%u: Week of the Year (00-53) (Sunday is the first day of the week)

%w: Day of the Week (0-6)

%W: Week of the Year (00-53) (with Monday as the first day of the week)

%x: Show date directly (MM/DD/YY)

%y: Last two digits of the year (00.99)

%Y: Full year (0000-9999)

If you do not start with a plus, it means to set the time, and the time format is MMDDHHMM[[CC]YY][.SS], where mm is the month, DD is the day, HH is the hour, MM is minutes, CC is the first two digits of the year, YY is the year after two digits, SS is the number of seconds

Parameters:

-D datestr: Displays the time set in the DATESTR (non-system time)

--HELP: Display Auxiliary message

-S DATESTR: Set the system time to the time set in Datestr

-U: Show current GMT

--version: Show version number

Example:

Show time after Skip, and then

Show current date: #date ' +%t%n%d '

Display month and day: Date ' +%b%d '

Display date and set time (12:34:56): #date--date ' 12:34:56 '

Note: When you don't want to have a meaningless 0 o'clock (say, 1999/03/07), you can insert a symbol into the tag, for example, Date ' +%-h:%-m:%-s ' will remove the meaningless 0 in seconds and minutes, as if the original 08:09:04 would change to 8:9:4. In addition, the system time can be set only if the authority (for example, Root) is acquired.

When you change the system time as root, remember to use CLOCK-W to write the system time to the CMOS so that the system time will continue to hold the latest correct value the next time you reboot.

Example: Modify Date Time

At the command line, enter:

Date: Display current time Fri 3 14:15:16 CST 2007

Date–s: Modify Time by string

Can only modify the date, do not modify the time, enter: Date-s 2007-08-03

Only modified time, input: Date-s 14:15:00

Also modify the date time, note to add double quotation marks, the date and time there is a space between, enter:

#date-S "2007-08-03 14:15:00"

2. View hardware Time

# Hwclock

Set Hardware time

# hwclock-set-date= "07/07/06 10:19" (Month/day/year: minutes: seconds)

3. Synchronization of hardware time and system time

According to the foregoing, reboot the system, hardware time will read the system time, to achieve synchronization, but do not restart, you need to use the Hwclock command to achieve synchronization.

The hardware clock is synchronized with the system clock:

# Hwclock--hctosys (HC stands for hardware time, SYS represents system time)

system clock and Hardware clock synchronization: (To synchronize the system's time to the hardware clock)

# HWCLOCK–SYSTOHC

Linux hardware clock and system clock settings

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.