Linux mtr Command detailed

1.MTR Introduction:

The MTR is a very good network connectivity judgment tool in Linux, which combines the features of Ping, traceroute,nslookup.

Apt-get Install Mtr-y

Installing the MTR Tools

Relevant parameters of 2.Mtr:

Mtr-s

Used to specify the size of the ping packet

Mtr-nno-dns

Do not do domain name resolution for IP address

Mtr-a

To set the IP address of the sending packet this is useful for a host by multiple IP addresses

Mtr-i

Use this parameter to set the requirement between ICMP returns by default is 1 seconds

Mtr-4

IPv4

Mtr-6

IPv6

The output of the 3.MTR is detailed:

MTR 8.8.8.8

Test connectivity to Google DNS using commands

My traceroute [v0.75]

Hybird (0.0.0.0) Tue Nov 1 23:06:00 2011

Keys:help Display Mode Restart statistics Order of fields quit

Packets Pings

Host loss% Snt last AVG best Wrst StDev

1.121.52.213.161 0% 25 0.7 2.2 0.6 13.7 3.0

2.10.0.20.37 0% 25 0.8 0.8 0.6 1.2 0.1

3.61.50.163.249 0% 24 1.2 1.7 1.1 4.8 1.0

4. bt-204-129.bta.net.cn 0% 24 1.2 4.3 1.0 49.5 11.1

5.124.65.60.137 0% 24 1.1 1.1 0.9 1.6 0.1

6.61.148.156.57 0% 24 2.4 2.5 1.8 9.3 1.5

7.202.96.12.89 0% 24 4.3 5.4 2.3 38.8 7.8

8.219.158.15.14 0% 24 52.1 42.4 41.3 52.1 2.2

9.219.158.3.74 0% 24 75.4 75.7 58.1 86.4 6.9

10.219.158.96.246 0% 24 34.5 33.9 33.0 37.8 1.0

11.219.158.3.238 0% 24 99.0 93.6 77.8 102.0 5.7

12.72.14.215.130 0% 24 39.1 38.3 36.3 48.9 2.9

13.64.233.175.207 4.2% 24 36.7 42.4 36.5 84.2 13.6

14.209.85.241.56 0% 24 36.7 43.1 36.3 91.8 16.6

209.85.241.58

15.216.239.43.17 0% 24 37.3 40.1 37.0 56.4 6.3

209.85.253.69

209.85.253.71

216.239.43.19

16.216.239.48.238 0% 24 38.5 41.6 37.1 50.3 4.6

216.239.48.234

216.239.48.226

216.239.48.230

Google-public-dns-a.google.com 0% 24 37.6 37.8 37.2 39.8 0.7

An example of an escalation notice is as follows:

First column: The IP address and the native domain name are displayed, which is like traceroute

Second column: Snt:10 sets the number of packets sent per second, the default value is 10 can be specified by the parameter-C. Where-C is the description: –report-cycles COUNT

Column Three: is the packet loss rate for each corresponding IP displayed

Fourth column: The most recent return delay shown

Fifth column: Is the average this should be the mean time delay for sending ping packets

The Sixth column: is the best or the shortest delay

The seventh column: The worst or the most frequent delay

Eighth column: is the standard deviation

This article is from the "Intelligent Future _XFICC" blog, please be sure to keep this source http://xficc.blog.51cto.com/1189288/1741336

Linux mtr Command detailed