Linux tar compression and packaging command usage page 1/2

Source: Internet
Author: User
Tags gz file

Tar command
[Root @ Linux ~] # Tar [-cxtzjvfppn] file and directory ....
Parameters:
-C: Create a parameter command for the compressed file );
-X: Unlock the parameter command of a compressed file!
-T: view the files in the tarfile!
Note that C/X/T can only exist under the parameter! Cannot exist at the same time!
Because it is impossible to simultaneously compress and decompress.
-Z: does it have the gzip attribute at the same time? That is, do I need to use gzip for compression?
-J: Does it have Bzip2 attributes at the same time? That is, do I need to use Bzip2 for compression?
-V: The file is displayed during compression! This is common, but it is not recommended to use it in the background execution process!
-F: use the file name. Please note that the file name should be followed immediately after F! Do not add parameters!
For example, using "Tar-zcvfp tfile sfile" is an incorrect method.
"Tar-zcvpf tfile sfile" is correct!
-P: use the original attributes of the original file (the attributes will not be changed based on the user)
-P: absolute paths can be used for compression!
-N: a new date (yyyy/mm/DD) will be packed into the new file!
-Exclude file: do not pack the file during compression!
Example:
Example 1: package all the files in the/etc directory into/tmp/etc.tar
[Root @ Linux ~] # Tar-CVF/tmp/etc.tar/etc <= package only, do not compress!
[Root @ Linux ~] # Tar-zcvf/tmp/etc.tar.gz/etc <= compressed with Gzip
[Root @ Linux ~] # Tar-jcvf/tmp/etc.tar.bz2/etc <= compressed with Bzip2
# Note that the file name after parameter F is obtained by ourselves. We use. tar for identification.
# If the Z parameter is added, .tar.gz or. tgz is used to represent the tar file ~ compressed by gzip ~
# If you add the J parameter, use .tar.bz2 as the file name ~
# A warning message is displayed when the preceding command is executed:
# "Tar: removing leading '/' from Member names" is a special setting for absolute paths. Example 2: Check the files in the above/tmp/etc.tar.gz file?
[Root @ Linux ~] # Tar-ztvf/tmp/etc.tar.gz
# When we use gzip to compress the files in the TAR file,
# Add the Z parameter! This is important! Example 3: Decompress the/tmp/etc.tar.gz file under/usr/local/src.
[Root @ Linux ~] # Cd/usr/local/src
[Root @ Linux SRC] # tar-zxvf/tmp/etc.tar.gz
# By default, We Can uncompress files anywhere! In this example,
# First, I will transform the working directory to the/usr/local/src directory, and unlock/tmp/etc.tar.gz,
# The unlocked directory will be in/usr/local/src/etc! In addition, if you enter/usr/local/src/etc
# The file attributes in this directory may be different from those in/etc!

Example 4: Under/tmp, I only want to unbind the etc/passwd in/tmp/etc.tar.gz.
[Root @ Linux ~] # Cd/tmp
[Root @ Linux TMP] # tar-zxvf/tmp/etc.tar.gz etc/passwd
# I can use tar-ztvf to check the file name in the tarfile. If you only need one file,
# You can issue it in this way! Notice! The root directory in etc.tar.gz/is removed!

Example 5: Back up all the files in/etc/and save their permissions!
[Root @ Linux ~] # Tar-zxvpf/tmp/etc.tar.gz/etc
# This-P attribute is very important, especially when you want to keep the attributes of the original file!

Example 6: only new files in/home are backed up.
[Root @ Linux ~] # Tar-N '2014/1/01 '-zcvf home.tar.gz/home

Example 7: I want to back up/home,/etc, but not/home/dmtsai
[Root @ Linux ~] # Tar-exclude/home/dmtsai-zcvf myfile.tar.gz/home/*/etc

Example 8: package/etc/and unpack it under/tmp without generating a file!
[Root @ Linux ~] # Cd/tmp
[Root @ Linux TMP] # tar-CVF-/etc | tar-xvf-
# This action is a bit like CP-r/etc/tmp ~ It is still useful!
# Note that the output file is changed to-and the input file is changed to-, and there is another file | Yes ~
# This represents standard output, standard input, and pipeline commands respectively!
# This part will be explained again when we mention this command in bash shell!

Gzip and zcat commands
[Root @ Linux ~] # Gzip [-CDT #] File Name
[Root @ Linux ~] # Zcat file name .gz
Parameters:
-C: outputs compressed data to the screen and can be processed through data stream redirection;
-D: extract parameters;
-T: it can be used to check the consistency of a compressed file ~ Check whether the file has any errors;
-#: Compression level.-1 is the fastest, but the compression ratio is the worst.-9 is the slowest, but the compression ratio is the best! Default Value:-6 ~
Example:
Example 1: Convert/etc/man. config to/tmp and compress it with Gzip
[Root @ Linux ~] # Cd/tmp
[Root @ Linux TMP] # cp/etc/man. config.
[Root @ Linux TMP] # gzip man. config
# At this time, man. config will become man.config.gz! Example 2: Read the content of Example 1!
[Root @ Linux TMP] # zcat man.config.gz
# The man.config.gz extracted file content is displayed on the screen !!

Example 3: Decompress the file in Example 1
[Root @ Linux TMP] # gzip-D man.config.gz

Example 4: compress man. config unlocked in Example 3 with the optimal compression ratio and keep the original file
[Root @ Linux TMP] # gzip-9-C man. config> man.config.gz

Bzip2, bzcat command
[Root @ Linux ~] # Bzip2 [-CDZ] File Name
[Root @ Linux ~] # Bzcat file name .bz2
Parameters:
-C: output the data generated during the compression process to the screen!
-D: extracted Parameters
-Z: Compression Parameters
-#: Same as gzip, it is used to calculate the compression ratio.-9 is the best, and-1 is the fastest!
Example:
Example 1: compress/tmp/man. config with Bzip2
[Root @ Linux TMP] # Bzip2-Z Man. config
# At this time, man. config will become man.config.bz2! Example 2: Read the content of Example 1!
[Root @ Linux TMP] # bzcat man.config.bz2
# The man.config.bz2 extracted file content is displayed on the screen !! Example 3: Decompress the file in Example 1
[Root @ Linux TMP] # Bzip2-D man.config.bz2

Example 4: compress man. config unlocked in Example 3 with the optimal compression ratio and keep the original file
[Root @ Linux TMP] # Bzip2-9-C man. config> man.config.bz2

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.