Linux Redhat add hard drives and mount

1, first add a hard disk (I use the virtual machine VMware, add a new hard disk more convenient), add after the Linux host is not recognized, must be restarted before it will be recognized.

2. Format the hard drive and install the file system. (You can use parted + hard disk, enter the edit after using mktable + file system type such as: GPT, etc.) But I this host can not be added to the Ext4 file type, and later automatically hang in the file does not recognize the GPT file system, and then I use MKFS.EXT4/DEV/SDB1.

3, automatically mount, create new files on the desktop, soft. Edit/etc/fstab Add a new line at the bottom of the file:/dev/sdb1/root/desktop/soft ext4 defaults 0 0

4, flush hangs in file: Mount-a

5, if no error, check whether the success of the hang. Mount

This article is from the "10557356" blog, please be sure to keep this source http://10567356.blog.51cto.com/10557356/1968293

Linux Redhat add hard drives and mount