Linux SATA hard drive mounting

Mounting SATA hard disks in linux # fdisk-lDisk/dev/uba: 500.1 GB, 500107862016bytes255heads, 63 sectors/track, running * 5128225280bytesDeviceBoo...
Mounting SATA hard disks in linux # fdisk-lDisk/dev/uba: 500.1 GB, 500107862016 bytes255 heads, 63 sectors/track, 60801 cylindersUnits = cylinders of 16065*512 = 8225280 bytes Device Boot Start End Blocks Id System/dev/uba1 1 60801 488384001 B Win95 FAT32 www.2cto.com 1. kernel Compilation, adding support for usb storage devices 2. create a mount point. mkdir-p/mnt/usbhd_hx. note: you need to mount Partition 3 with Blocks Id System. mount-t ntfs is used for disk partitions in ntfs format, use the-t vfat parameter for the disk partition in the fat32 format (the male file is garbled: moun T-t vfat-o iocharset = cp936/dev/uba1/mnt/usbhd_hx) 4. in linux, use the fdisk partition command and mkfs to create a file system command. you can create a mobile hard disk partition into the ext2 and ext3 formats specific to the linux system. 5. mount the command mount/dev/uba1/mnt/usbhd_hx directly.