Linux Set network card rate __linux

Ethtool

# Ethtool ETHX     //Query ETHX network Basic Settings
# Ethtool–h       //Display Ethtool command help
# ethtool–i ethx  // Query ETHX Network port Information
# ethtool–d ETHX  //Query ETHX port registration Information
# ETHTOOL–R ETHX  //Reset ETHX port to Adaptive mode
# Ethtool–s ETHX  //query ETHX network receipt and contract Statistics
# ethtool–s ethx [Speed 10|100|1000]\   //Set the network port rate 10/100/1000m
                  [Duplex half| Full]\    //Set the network port half/Full-duplex
                  [Autoneg on|off]\      //Set the network port is self negotiated
                  [port tp|aui|bnc|mii]\//Set network Port type

Mii-tool

# mii-tool-f Media ethx

Media:1000basetx-hd, 1000BASETX-FD,
       100baset4
       , 100BASETX-FD, 100BASETX-HD, 10BASET-FD, 10BASET-HD,
       (to advertise both HD and FD) 1000baseTx, 100baseTx, 10baseT
# mii-tool-r ETHX//recovery from adaptation As a mode