Linux System Management PV-VG-LV

Source: Internet
Author: User
Tags uuid hex code


Take 10G from each of the two disks and make up the 20G volume group. Divides a 16G logical volume from a volume group, formats and mounts the logical volume to/mbox.

1. Add disk SDB and divide the disk into a 10G zone.

[Email protected] ~]# Fdisk/dev/sdb

Warning:dos-compatible mode is deprecated. It ' s strongly recommended to

Switch off the mode (command ' C ') and change display units to

Sectors (Command ' u ').

Command (M for help): P

Partition number (1-4): 1

First cylinder (1-10443, default 1):

Using Default value 1

Last cylinder, +cylinders or +size{k,m,g} (1-10443, default 10443): +10g

2. Change the partition format to LVM

Command (M for help): t

Selected partition 1

Hex code (type L to list codes): 8e

Changed system type of partition 1 to 8e (Linux LVM)

Command (M for help): p {Enter P to view create disk partition information}

disk/dev/sdb:85.9 GB, 85899345920 bytes

255 heads, Sectors/track, 10443 cylinders

Units = Cylinders of 16065 * 8225280 bytes

Sector size (logical/physical): bytes/512 bytes

I/O size (minimum/optimal): bytes/512 bytes

Disk identifier:0x8ba5d75e

Device Boot Start End Blocks Id System

/DEV/SDB1 1 1306 10490413+ 8e Linux LVM

Command (M for help): W {confirm the creation of OK and enter W save

3. Add a second disk repeat above 1.2. Operation

4. Check if two LVM disks are OK

[Email protected] ~]# fdisk-l |grep LVM

/DEV/SDB1 1 1306 10490413+ 8e Linux LVM

/DEV/SDC1 1 1306 10490413+ 8e Linux LVM

5. Create PV

[Email protected] ~]# PVCREATE/DEV/SDB1/DEV/SDC1

Dev_is_mpath:failed to get device for 8:17

Physical volume "/DEV/SDB1" successfully created

Dev_is_mpath:failed to get device for 8:33

Physical volume "/DEV/SDC1" successfully created

6. View the creation of the PV

[Email protected] ~]# Pvscan

PV/DEV/SDB1 lvm2 [10.00 GiB]

PV/DEV/SDC1 lvm2 [10.00 GiB]

Total:2 [20.01 Gib]/in use:0 [0]/In no vg:2 [20.01 Gib]

7. View PV Details

[Email protected] ~]# Pvdisplay

"/DEV/SDB1" is a new physical volume of "10.00 GiB"

---NEW physical volume---


VG Name

PV Size 10.00 GiB

Allocatable NO

PE Size 0

Total PE 0

Free PE 0

Allocated PE 0


"/DEV/SDC1" is a new physical volume of "10.00 GiB"

---NEW physical volume---


VG Name

PV Size 10.00 GiB

Allocatable NO

PE Size 0

Total PE 0

Free PE 0

Allocated PE 0


8. Create VG [named DATA_VG]

[Email protected] ~]# vgcreate DATA_VG/DEV/SDB1/DEV/SDC1

Device DATA_VG not found (or ignored by filtering).

Dev_is_mpath:failed to get device for 8:17

Physical volume "/DEV/SDB1" successfully created

Physical volume "/DEV/SDC1" successfully created

[Email protected] ~]# Vgdisplay

---Volume Group---


System ID

Format lvm2

Metadata Areas 2

Metadata Sequence No 1

VG Access Read/write

VG Status resizable


Cur LV 0

Open LV 0

Max PV 0

Cur PV 2


VG Size 20.00 GiB

PE Size 4.00 MiB

Total PE 5120

Alloc pe/size 0/0

Free Pe/size 5120/20.00 GiB


9. Divide 16G from the created 20G VG [named DATA_LV]

[Email protected] ~]# lvcreate-l 16g-n data_lv DATA_VG

Logical volume "Data_lv" created

10.16GLV formatted as EXT3 format

[Email protected] ~]# MKFS.EXT3/DEV//DATA_VG/DATA_LV

MKE2FS 1.41.12 (17-may-2010)

File System label =

Operating system: Linux

Block size =4096 (log=2)

Chunked size =4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

1048576 inodes, 4194304 blocks

209715 blocks (5.00%) reserved for the Super user

First block of data =0

Maximum filesystem blocks=4294967296

Block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,


Writing Inode table: complete

Creating Journal (32768 blocks): complete

Writing Superblocks and FileSystem accounting information: Complete

11. Create the/mbox and hang the/data_lv on to/mbox

[Email protected] ~]# Mkdir/mbox

[Email protected] ~]# Mount/dev/data_vg/data_lv/mbox

12. Enter Df-h to view mount information

[Email protected] ~]# df-h

Filesystem Size used Avail use% mounted on

/dev/sda2 97G 4.0G 88G 5%/

Tmpfs 932M 556K 931M 1%/DEV/SHM

/DEV/SDA1 194M 34M 151M 19%/boot

/dev/sda3 97G 188M 92G 1%/data

/dev/sr0 3.6G 3.6G 0 100%/media/rhel_6.5 x86_64 Disc 1

/dev/mapper/data_vg-data_lv 16G 173M 15G 2%/mbox

[Email protected] ~]#

This article is from the "12619984" blog, please be sure to keep this source

Linux System Management PV-VG-LV

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.