Linux+windows+arm Joint development

Configuration Environment One:

First step: Install the virtual machine

            1) Install virtual machine +linux12.04            2) Install FTP software Step two: Configure HyperTerminal ( serial)             1) Development Board software (friendly arm comes with) installation             2) Download HyperTerminal: HTTP://WW w.newasp.net/soft/16364.html            NOTE: Online download of the same as WinXP Super Terminal is not very good, always broken, verified that the cracked version is better.             3) Set the serial port, baud rate to connect. Step three: Modify the ARM board IP address to static address             1) to the directory: cd/etc/init.d/          & nbsp 2) Open the Ifconfig-eth0 file and add it at the end of the file:/sbin/ifconfig eth0 192.168.1.20 up       3) using HyperTerminal, entering reboot, restarting the Development Board, Then enter ifconfig to view the IP address, which becomes:192.168.1.20            Reference: HTTP://WWW.2CTO.COM/KF/201404/ 290474.html            4) Add user and password             AddUser Xinglei, after You can enter your password. Fourth step: From the top, you can log in to the Development Board by FTP.   Configuration Environment II:    install Java Virtual machine: Jdk-6u45-linux-x64.bin (other methods, such as RPM may not be installed alienNot succeed)

Linux+windows+arm co-development