List of VLAN configuration commands

Command command feature configure terminal into global configuration mode vlan  vlan-id create VLAN command name  vlan-name Add name end configuration to created VLAN, return privileged mode show VL An  {name vlan-name | id vlan-id} View the results of the configuration completion copy Running-config startup config Saves the configuration information no vlan  Vlan-id deletes an existing VLAN interface  interface-id into the specified interface shutdown closes the specified interface no shutdown turns on the specified interface switchport mode Access sets the mode of the interface to be visited Q-mode switchport access VLAN  vlan-id Add interfaces to the specified VLAN switchport mode dynamic desirable sets the interface to dynamic active Adaptive mode switchport mode D Ynamic Auto Sets the interface to a dynamic passive adaptive pattern switchport mode trunk sets the interface to the trunk mode Switchport nonegotiate sets the interface to no negotiation mode, closes the DTP protocol Switchport trunk E Ncapsulation dot1q the trunk protocol that sets the interface Switchport trunk the trunk protocol of the encapsulation ISL setting interface switchport trunk native VLAN  vlan-id set the intrinsic V LAN VTP mode  Mode set VTP's working mode VTP domain  domain-name set VTP work domain name VTP password  password set VTP password VTP versio n  version-number set VTP working version, there are 1 and 22 versions VTP pruning configuration VTP cropping feature show VTP status View VTP information Private-vlan Primary set Pvlan as primary VLAN Private-vlan Isolated SettingsPvlan set Pvlan the secondary VLAN information associated with the Community VLAN Private-vlan Association  vlan-id settings and the primary VLAN for the isolation VLAN Private-vlan community Switchport private-vlan host-association  Vlan-id settings interface and primary VLAN and secondary VLAN Private-vlan mapping  Vlan-id ... Set the mapping Association of Interfaces and VLANs