The hard drive installs the system, the speed is fastest. Do not use the CD-ROM direct local installation, what disc AH/cd burning AH. , all the clouds! Kung Fu has been saved.
(1) First download and unzip the system you want
(2) Open the "extracted" folder as shown below
Computer knowledge
(3) Installation method One: Running the folder inside the "AUTORUN." EXE "Install Ghost XP SP3" to choose the first option can be installed by default. The following figure
(4) Installation mode two: Running folder inside the "Onekey." EXE "can also be installed by default C-disk path. Just be sure. The following figure
(5) Both of the above methods can be installed smoothly.
1: The system decompression can not be directly extracted to C disk, because we are to the system default into C disk system disk, so the unpacked folder can not be put to C disk, or can not install. You see above I am decompression in "F", of course, except for C disk, other letter can be
2: The extracted folder can never be placed in the "Chinese folder" inside. Otherwise, the hard drive installer can not support the Chinese path, causing some users to say that "OK button is gray" can not click the result. Just like the picture below
This is because I put the "ghost_xp_sp3_dnczjb_v9.8" folder in the "System Folder" inside. The hard drive installer cannot support the Chinese path. In this case, turn off the hard drive installer first. Then to the F Disk "System Folder" casually changed to a non-Chinese form can be, for example: 9669. Of course, you cannot modify the Chinese folder directly in the hard disk installer to see the small model map
After determining all automatic installation, the general installation time in 5-10 minutes! You can legs a cigarette and rest! ^_^
Add: The General Ghost System can be installed like this. Some systems do not take ONEKEY.EXE. The site has to provide download!