LT2252WD Base Disassembly

Failure phenomenon:

LT2252WD base how to disassemble?

Reason Analysis:

The base of the LT2252WD is as shown in the picture:

Similar to the base of the display disassembly, can refer to the document.

Solution:

1. Flip the monitor over, find the screws at the bottom of the base, loosen the screws (the screw can only be loosened and cannot be removed)

2. Remove the base, the display flat, observe the display structure, behind a plastic small cover, need to remove the cover;

Due to the special design, the cover is removed with a certain skill. It is recommended to use a screwdriver to poke outward from the bottom to the sides;

Take it off as shown in the picture:

Remove the screws and remove the display bracket.

PS: The display control Take-off and landing switch for the front of the blue small clamp, after extraction can freely adjust the display height.