Manually configure static IP addresses in centOS

Source: Internet
Author: User

CentOS manually configure static IP address 1, vi/etc/sysconfig/network-scripts/ifcfg-eth0ifcfg-eth0 corresponding to the NIC, if there are multiple NICs under the network-scripts directory there will be ifcfg-eth1, ifcfg-eth2 and so on. Modifying the ifcfg-eth0 file, configure DEVICE = eth0BOOTPROTO = static # static ipBROADCAST = 192.168.1.255 # corresponding subnet broadcast address IPADDR = 192.168.1.120 # IP address NETMASK = 255.255.255.0 # network mask GATEWAY = 192.168.1.1 # gateway hwaddr = 00: 0C: 29: A4: 04: 1D # NM_CONTROLLED = "yes" ONBOOT = yesTYPE = Ethernet 2, vi/etc/sysconfig/networkNETWORKING = yesNETWORKING_IPV6 = noHOSTNAME = hh120GATEWAY = 192.168.1.1, vi/etc/resolv. confnameserver 192.168.1.1

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.