MEGACLI view RAID card and hard drive information

Source: Internet
Author: User

Installation of MEGACLI

By following the link

http://down.51cto.com/data/2042596

Or

Http://pan.baidu.com/s/1eQ2FeHc

Download to the Windows Local desktop, and then on the Linux command line command: rz-be, in the Pop-up window select the compressed package that you just downloaded (be careful not to tick the ASCII mode to transfer the file )

Tar XF Megacli-8.02.21-1-mdv2012.0.x86_64.rpm.tar
RPM-IVH megacli-8.02.21-1-mdv2012.0.x86_64.rpm

The default Yum source wood has, for easy installation, can be manually added to the local Yum source, later installation can execute the following command:

Yum install megacli-y (for local Yum source build, please visit local Yum source)

First, view the RAID card information
Megacli-ldinfo-lall-aall

[Email protected] robin]# Megacli-ldinfo-lall-aall

osspecificinitialize:failed to load libsysfs.so.2.0.2 * Ensure that LIBSFS are present in the system.
The dependent library libsysfs.so.2.0.1 not available. Please contact LSI for distribution of the

Adapter 0--Virtual Drive information:
Virtual drive:0 (Target id:0)
Name:
Raid Level:primary-1, Secondary-0, RAID level Qualifier-0
size:930.5 GB
Mirror data:930.5 GB
State:optimal <<<< This is the normal state.

Strip size:64 KB
Number of Drives per Span:2 <<<< RAID Group contains 2 disks (but is actually 4 500G SSD to do RAID10).

Span depth:2 <<<< Depth If 1, the actual is only RAID 1. 2 indicates can be RAID 10

Default Cache Policy:writeback, readadaptive, Direct, No Write cache if bad BBU
Current Cache Policy:writeback, readadaptive, Direct, No Write cache if bad BBU
Default Access Policy:read/write
Current Access Policy:read/write
Disk Cache Policy:disk ' s Default
Ongoing progresses:
Background initialization:completed 41%, taken min.
Encryption Type:none
Default Power Savings Policy:controller Defined
Current Power Savings Policy:none
Can spin up in 1 Minute:no
LD has drives the support T10 power Conditions:no
LD ' s IO profile supports MAX power savings with cached Writes:no
Bad Blocks Exist:no
is VD Cached:no

Note:

The RAID model corresponding table information is as follows:

RAID level:primary-1, Secondary-0, Raidlevel Qualifier-0 "#代表Raid 1

RAID level:primary-0, Secondary-0, raidlevel Qualifier-0 "#代表Raid 0

RAID level:primary-5, Secondary-0, Raidlevel Qualifier-3 "#代表Raid 5

RAID level:primary-1, Secondary-3, Raidlevel Qualifier-0 "#代表Raid10


Second, view the hard disk information:
[email protected] robin]# Megacli-pdlist-aall

# # #有如下样式的几段, which shows the actual number of hard drives (below is a piece of 500G SSD information)

Enclosure Device id:32
Slot Number:3
Drive ' s postion:diskgroup:0, Span:1, arm:1
Enclosure position:0
Device Id:3
wwn:50025388a0061518
Sequence Number:2
Media Error count:0
Other Error count:0
Predictive Failure count:0
Last predictive Failure Event Seq number:0
PD Type:sata
Raw size:465.761 GB [0x3a386030 sectors]
Non coerced size:465.261 GB [0x3a286030 sectors]
Coerced size:465.25 GB [0x3a280000 sectors]
Firmware State:online, spun up
Device Firmware level:bb0q
Shield counter:0
Successful Diagnostics Completion ON:N/A
SAS Address (0): 0x4433221107000000
Connected Port Number:3 (path0)
Inquiry data:s1dhnsada04008b Samsung SSD 840 EVO 500GB ext0bb0q
FDE enable:disable
Secured:unsecured
Locked:unlocked
Needs EKM Attention:no
Foreign State:none
Device speed:6.0gb/s
Link speed:6.0gb/s
Media Type:solid State Device
Drive:not Certified
Drive temperature:32c (89.60 F)
PI Eligibility:no
Drive was formatted for PI Information:no
Pi:no PI
Drive ' s write cache:disabled
Drive ' s NCQ setting:disabled
Port-0:
Port status:active
Port ' s linkspeed:6.0gb/s
Drive has flagged a s.m.a.r.t alert:no


For more information on how to use this tool, please visit:

http://www.ttlsa.com/tools/megacli-tool-query-raid-status/

MEGACLI view RAID card and hard drive information

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.