We have learned to shoot "Meng sister paper" 14 strokes, to understand the portrait of the basis for the shooting, then share the exclusive later methods. The latter should be regarded as a kind of adjustment of the early stage, in the case can not be dealt with in the early stage, through the later to the appropriate correction and treatment of photos, so that the photos can achieve the desired effect. However, in the post-processing, do not excessive adjustment caused the photo distortion, the simpler the more natural the better.
LR interface
PS interface
Compared with the original film in the late stage model: @ Song person Author: a Wang Yibo
1, Photo cutting
Early because of such as lenses, scenes and other reasons, the composition may not be satisfactory, at this time it is necessary to adjust the appropriate composition by cutting later.
2, Digital color
Here to mention two commonly used software, one is photo shop (hereinafter referred to as PS), the other is subordinate to the photo shop Light Room (hereinafter referred to as LR). LR content and function similar to camera raw, simple and practical.
First, the basic adjustment through LR
First step
Because of the color difference, the camera screen and computer screen colors will not be exactly the same, if the computer to see white balance, exposure and other parameters of the problem, within a certain range, LR can be adjusted.
Second Step
Third Step
After the basic parameters are set, start to adjust the color of the photos according to their own preferences and ideas, in LR, usually orange dominant color, yellow supplemented. Red dominant Lip color, magenta supplement. Other colors in the scene can be adjusted according to the color of the corresponding, and then Debug.
Hue separation
In the LR adjustment, the dominant overall tone is the "separate Hue" column, through the hue control of the high light and shadow to pull out the desired overall tonal effect.
Fifth step LR Adjustment effect Comparison
Complete LR phase contrast diagram
LR in the "Effect" column is also very practical, can be based on their preferences to add dark or noisy, usually in the portrait is more centered, add a bit of dark corner will be more prominent task body.
LR Adjust export, enter PS for detail adjustment
See LR export photo brightness is too high, adjust the brightness in PS.
Sixth step
Color in PS I usually use an optional color to complete, red and yellow dominate the skin and lips, yellow most of the case will also affect the skin, and then can be based on the environment and the color of the pictures to adjust the corresponding color, white and black similar to the LR in the high light and shadow adjustment, leading the whole picture of tonal feeling.
Seventh Step Red
Eighth Step White
Nineth Step Black
Final Completion diagram Author: A piece of Wang Yibo
Finally, according to the needs and model quality, through the liquefaction of PS to perfect the model's body and facial features, through the Repair tool and seal tool to repair the defect of the model skin.
Category:
- PS Image Processing
- PS Post-processing tutorial