When using a wireless terminal to connect to a wireless network, if there is a search signal, the connection is unsuccessful, the following methods can be used to troubleshoot:
Connecting to the wrong signal or entering an incorrect password will cause the connection to be unsuccessful, please confirm the wireless signal name (SSID number) and the wireless password.
Confirm method : Through the wired computer to connect and login to the Router management interface, click on the
wireless settings
>>
Basic Settings to view the SSID. As shown in the following illustration:
Click Wireless
Settings
>>
Wireless security Settings to confirm the wireless password. As shown in the following illustration:
After confirming the wireless name and wireless password, it is recommended that you remove the profile before you search for your own wireless signal and try to connect again.
Delete method : Take Windows 7 system as an example, click on the network icon in the lower right corner of the computer, click
Open Network and Share center , find and click to
Manage wireless network , in the display of the network list, find the router signal,
right button Select and click
Delete Network . As shown in the following illustration:
Other systems to delete profiles please click the reference:
Wireless MAC address filtering on the router, the improper setting of the rules will cause the wireless connection to be unsuccessful, and it is recommended that the feature be temporarily disabled.
set up method : Through the wired computer to connect and login to the router management face, click
Wireless Settings
>>
wireless
MAC
address filtering , Turn off the wireless MAC address filtering function. As shown in the following illustration:
set up method : Through the wired computer to connect and login to the router management face, click the
wireless Settings
>>
Basic Settings ,
SSID modified to other letters or numbers combination of names, click c5> Save . Click on
Wireless Settings
>>
Wireless security Settings ,
PSK
password modified to at least 8-bit password, click
Save .
After you modify the wireless parameters, some routers need to be reset, depending on the page prompts. The wireless terminal attempts to connect to the wireless signal after the router reboot is complete.
If you do this, the wireless terminal is still unable to connect to the signal, please use the other wireless terminals to connect the router to confirm the normal access to the Internet. You can also use this wireless terminal to connect to other normal wireless network comparison tests.
If the other wireless Terminal Connection Wireless is normal, it may be the setup of individual terminals or failure, it is recommended to consult the corresponding manufacturer.
If all wireless terminals are not connected, it may be a router setup problem or a failure, you can try to restore the router to the factory setting state reset
