Mercury MW300R Router How to set up

Mercury MW300R Wireless router, now as long as 560 yuan, a very cheap wireless router, suitable for several users of the family! Users can use the network cable Connection number, it supports PPPoE, dynamic IP, static IP and other broadband access mode to meet the needs of different users. Can be used to build intranet sites, the built-in firewall can be IP, MAC, URL address, such as filtering, effective control of the network in the host's Internet access and Internet access time, and its occupation of bandwidth restrictions, to avoid the uneven distribution of resources, the phenomenon occurs.

We must set up the account which we apply to the telecommunication business in the route to be able to dial the Internet through the route! How do we configure the router correctly?

1. Remove the mw300r, put it on the table and turn on the power! Connect to the cat with a network cable and head to the RJ45 interface on the route blue! Use a network cable to connect to any of the remaining interfaces in the route, and the other end to the computer!

2, successfully connected to the computer, we have a simple configuration of the route! Open IE Browser, in the Address bar, enter 192.168 1.1, this address can be in the routing instructions to hit, generally are 192.168.1.1!

3, enter the Router page:

4. Setup Wizard, Next:

5, set up the Internet mode: PPPoE (ADSL virtual dial-up)

The choice of Internet here is the key to the success of the router, if not correct, you can not get the network signal correctly, certainly not normal internet (according to incomplete statistics, more than 50% of the customer is not successfully set up the team), the main point is: if the Internet needs to dial that is, enter the broadband account and password login ( Whether you have a cat or not, be sure to choose the PPPoE option (grey is often important

), if the previous internet is directly connected to the Internet do not need, you can choose to automatically obtain ip!! (The new road there is no automatic choice of options, does not affect the need to worry about hehe)

6. Set up dial-up account number and password: (You get the Internet account password from telecom)

7, set up a wireless network account and password, fast! The last step! haha

Click Next to display the Wireless network Settings page, only need to set up a wireless network account at the SSID (originally tp-link the default account needs to change), preferably for you familiar with the name, and the following WPA2-PSK password set common password (preferably 8-digit password).

8, save and restart the route

9, check the settings are correct

(1) After the successful restart, login 192.168.1.1, click on the router's left menu bar in the first article:

Run state, check the right parameter (wireless status/WAN port State) to display the latest network parameters of the router, including the parameters you have just set: The main check item is the SSID number, and the WAN port State, if the WAN port state can display the IP address and the gateway and other parameters, That means that the router is set up successfully, you can open the browser window, enter the mother's address to swim network Bar ~

(2) If the WAN parameters can not be properly displayed, and can not display the IP address of the WAN port, then in the left network parameters-->wan port settings to re-examine the way the Internet account and password, confirm the correct input and save the restart route;

After the completion of the last step, you can test the Internet, if the above one step in the normal display of information, please carefully check the configuration if there is a problem, if not, you can try to reset the factory settings after the reset to follow the steps set.

How is the mercury MW300R router configured for the switch?

Routers when the switch is used, as long as two points: 1, modify the router "network parameters" inside the IP address, 2 routers of the WAN slot does not plug the network cable.

If you want the computer, the mobile phone at the same time, the router is best improper switch used, so wasteful, wireless function can not play. Set up the router, the formation of their own local area network, computer mobile phone online are not worried.

To set the method:

1, do not pick up the router Internet, open the computer's "local connection--support-Details", remember you get the IP, subnet mask, gateway, DNS server and other data; 2, enter your own router, Modify the LAN port IP 192.168.2.1 At the network parameters, restart the router, and the computer automatically gets the new IP. 3, with 192.168.2.1 again into the router, set up a WAN at the network parameters, select static IP mode, the IP, subnet mask, gateway, DNS server and so on from the upstairs to fill in; 4, in the "Wireless Settings" where a password can be set.

PS: Other routers are similar to the settings, especially Tplink routing!

1. After the wireless router is set up

2, open with wireless network function of the computer, notebook double-click the wireless network connection, that is, the following figure volume control icon next

3, you can find your own wireless network name Double-click the connection

4, enter the password can be online