Method of hard reboot of TP-LINK Router

As the question is, you don't know how many times you have restarted the vro. But it seems that the method is incorrect every time. In fact, the reset effect is not achieved.

Like this, I changed the lanport IP start segment address and shut down the DNS. This is troublesome. 192.168.1.1 failed to enter the vro settings!

Use ipconfig on your computer to view your own IP address. The IP address is 169. Useless. Or back to the topic. Restart.

Step: first disconnect the power of the router, and then use a toothpick or pen to insert a reset hole, to keep it, and then connect the power supply for 2-3 seconds, when both M1 and M2 are displayed, the reset is released.

In short, power-off first, hold down reset, and then power-on, wait for M1, M2 lights to be on at the same time and OK.