Method of installing Win7 under PE and STATUS:0XC000000F solution

Everyone knows that Win7 all the files have more than 2 G, it is very troublesome to burn with a DVD.

Here, just tell everyone a no optical drive, do not burn, in PE under the hard disk installation WIN7 Good method:

First, the production of a bootable U disk, which has a PE function; (If your computer has an optical drive, then you can directly use the CD with PE to enter PE can.) )

Second, unzip your downloaded Windows7 CD image file to D disk, such as d:win7. Then right click on your computer's C-Disk selection format, ready to copy files;

Copy the bootmgr files and boot folders in the d:win7 to the C-packing directory, and the boot.wim copy of the D:win7sources directory to the sources directory of the C disk (you need to create a sources directory yourself);

Four, start-travel-cmd into DOS, switch to C disk, run C:BOOTBOOTSECT.EXE/NT60 C: The last line after the return of successfull that means success.

At this time the U disk or optical drive are taken out, restart the hard drive can enter the installation state;

(such as execution can be done in three times, the following is three execution of code, execute a line and then enter the next line of execution)

DOS Code

C:

CD Boot

Bootsect.exe/nt60 C:

After the restart automatically enter the Windows 7 installation interface, select the language and other preferences, click Next to enter the installation of Windows interface;

Six, this time does not point "installs now", but the point left bottom corner middle of "fixes the computer"! Then select the first item in the System recovery options to use the Reply tool that can help resolve Windows startup problems ..., and then select the last command prompt in the next step;

Seven, after the pop-up dos window, we switch to D disk, and run D:win7sourcessetup.exe can enter the normal installation.

(such as execution can be done in four times, the following is four execution of code, execute a line and then enter the next line of execution)

DOS Code

D:

CD Win7

CD sources

Setup.exe

Eight, in the out of the partition state select the first partition that is C disk, and then click on the format below, then point to the next step into the Windows7 normal installation state. After that, you can easily complete the installation of Win7 by relevant prompts, and the whole process is almost complete.

Some people will be prompted as follows when the first step executes the command reboot:

Error code

Windows Boot Manager

Windows failed to start. A Recent hardware or software change might being the

Cause. To fix the problem:

1.Insert your Windows installation disc and restart your computer.

2.Choose your language settings,and then click "Next."

3.Click "Repair your computer."

If you don't have this disc,contact your system administrator or computer

Manufacturer for assistance.

status:0xc000000f

Info:the Boot selection failed because a required device is inaccessible.

In fact, as long as the copy file in the third step there is no error, there will be no such a hint, so when this error occurs, please carefully check the file copy is wrong to solve the problem.