Mikrotik routeros u disk installation Tool Netinstall use

Attention:

1, this tool I did not test success, such as the use of a U disk with this tool, after the actual insertion of computer startup will be stuck, not too stable.

2, in fact, the official offer of a large part of the tutorial is the meaning, such as the external hard disk in the form of USB or SATA plug into the computer, and then made, and finally inserted directly into the computer to start, and finally installed like the installation interface, rather than a USB flash drive to install to the SSD. In other words, it can only be used on the USB flash drive you just made, you can't choose the installation location.

3, Netinstall itself is the boot of PXE, as well as most of the hardware upgrade use, PXE ClientID is actually manually set, as long as the settings and computer host the same network segment can be.

4, download the installation package Note is the official website to download the ALL_PACKAGES.NPK, not to extract the CD-less NPK package, but do not exclude the extracted packets can be used. You can try unpacking the package.

Use procedure:

The above operation is suitable as USB boot, and can only be installed into the USB driver is written to the inside, remember, if the use of USB adapter connected to the SATA hard drive, after the write is not started, because the boot mode has changed.

The following are the configurations that are installed through PXE:

Reference:

Http://mikrotikready.blogspot.com/2015/07/how-to-install-routeros-x86-in-usb.html

Https://wiki.edcwifi.com/index.php?title=RouterOS_%E5%AE%89%E8%A3%85%E4%BB%8B%E7%BB%8D

Https://wiki.mikrotik.com/wiki/Manual:Netinstall

Mikrotik routeros u disk installation Tool Netinstall use