mini2440 USB Stick Mount

Insert USB stick, debug serial port will show:

[[email protected] code]# USB 1-1: New full speed USB device using S3C2410-OHCI 4
USB 1-1: New USB device found, idvendor=0951, idproduct=1666
USB 1-1: New USB device Strings:mfr=1, product=2, serialnumber=3
USB 1-1: Product:datatraveler 3.0
USB 1-1: Manufacturer:kingston
USB 1-1: serialnumber:60a44c3d7ecdbe205974c700
USB 1-1: Configuration #1 chosen from 1 choice
SCSI2:SCSI emulation for USB Mass Storage devices
SCSI 2:0:0:0: direct-access Kingston DataTraveler 3.0 PMAP pq:0 ansi:6
SD 2:0:0:0: Attached SCSI generic sg0 type 0
SD 2:0:0:0: [SDB] 30712320 512-byte logical blocks: (15.7 gb/14.6 GiB)
SD 2:0:0:0: [SDB] Write Protect is off
SD 2:0:0:0: [SDB] assuming drive cache:write through
SD 2:0:0:0: [SDB] assuming drive cache:write through
Sdb:sdb4
SD 2:0:0:0: [SDB] assuming drive cache:write through
SD 2:0:0:0: [SDB] attached SCSI removable disk

Does not implement automatic mounts, mounts to be mounted manually.

Create mount Directory Mkdir/mnt/udisk

[Email protected]/]# cat/proc/partitions
Major Minor #blocks name

0 mtdblock0
1 Mtdblock1
2 5120 Mtdblock2
3 256640 Mtdblock3
4 262144 Mtdblock4
8 0 15356160 SDA
8 4 15356032 SDA4

See my USB flash drive is SDA SDA4

Mount/dev/sda4/mnt can be.

mini2440 USB Stick Mount