Mobile WiFi connection can not access the solution

Recently found a strange phenomenon in the company, it is common for people to be connected to a public WiFi wireless network, and the laptop is connected to a WiFi wireless network, and there is often a situation where some people can connect and others may not be able to connect, and I believe anyone who encounters this "mobile phone is not connected to the Internet "The problem will get the head long bag, today I accidentally found several feasible solutions, here with you to share, I hope to help you, if you think this article is good remember to collect, perhaps later met will be able to see.

For the principle of wireless router believe that the introduction of more people's head more pain, so the following directly to everyone talk about the solution. Please note: The following questions one and two is the setting of the router, problem three is the setting of the mobile phone, the author tested these 3 methods, and finally successfully solved a number of mobile phone users can connect to WiFi, but can not access the Internet problem.

Please restart the router before or after the operation, remove the router power and then plug in on it, this is the simplest, solution one, but the author unlimited WiFi network is not the author can control, so the author of the recent mobile phone to connect WiFi can not use the Internet is the method three.

　　Problem one:: Mobile phones can connect to the WiFi Internet, nothing changes, in a few days will not be able to connect WiFi

WORKAROUND: Set the router's DHCP service and assign a static address!

Detailed operation: Landing road with the same set page, such as in the browser input "192.168.1.1" login, username and password default is generally admin (different brand router address is not the same, do not know to see the wireless router on the surface of the callout), into the wireless router after the select "DHCP Server" "Static address Assignment", MAC address to fill in the phone WiFi MAC address (a total of 12 digits, such as: 43:9u:d3:ff:21:du or 43-9U-D3-FF-21-DU, different brand format), IP address to fill in the address you want to assign (such as : 192.168.1.199, of which 199 can be arbitrarily replaced by 1 to 255 of any number, the status of the choice of effective, save settings, the mobile phone can immediately access the Internet.

　　Warm tip : Mobile WiFi MAC address, in the mobile phone settings on the phone can be found.

　　Question two: Mobile phones can connect WiFi, but not on the web, unable to open the Web page

WORKAROUND: The DHCP server's NDS is not set in the router setup! Fill in DNS for your own area

is still the first login router settings interface, and then enter the DHCP server settings, the DHCP server set to start, and then fill out the address information as follows:

Address pool start Address: 192.168.1.100

Address pool End Address: 192.168.1.199

Address Lease Term: arbitrary

Gateway: 192.168.1.1 (This is based on the router landing address, generally not 192.168.1.1 is 192.168.0.1, the router surface label will be clearly labeled, it seems to see that)

Default Domain name: No fill

Primary DNS server: 202.96.128.96

Alternate DNS server: 202.96.128.166

　　Note : Primary DNS and Standby DNS fill in the telecommunications or netcom of their own cities, you use the telecommunications to fill the telecommunications DNS, not to place this address is not the same, the first is to determine whether the network is telecommunications or unicom, and then look at their place is where, the above 2 DNS addresses are telecommunications, Because we are using the telecommunications network, in addition, we are here in Dongguan, Guangdong, so through Baidu search "Dongguan Telecom DNS" can find the above results, you can also call to inquire about the network business access.