In fact, the film is not difficult, as long as the selection of High-quality protective film products, and clearly understand the process of film, their hands are not a matter ah! Let's take a look at the whole process of sticking the film together.
1, before the commencement, we must first prepare some tools, film, cleaning cloth, cleaning fluid is essential. Then it is necessary to carry out the early cleaning work, wipe the screen with clean liquid, clear dust impurities.
2, the following is the process of sticking film, now most of the film is three-layer structure, there is a, B and C, the middle of the film itself, paste the time must be aimed at the mobile phone, careful patience, pay attention not to let the dust into the screen and foil.
3, the novice operation will avoid the emergence of bubbles, the following work is to let bubbles disappear, the use of tools is hard card, will wipe cloth wrapped in the card outside to prevent scratching the screen.
4, after cleaning up the bubble, the last step is to clean the ash again, you can use wide blanket. Repeatedly cleaned two or three times, after the guarantee clean and then squeeze a small bubble is completed.
To sum up, mobile phone film is mainly the following steps: 1, cleaning screen, 2, the position of the positioning of the film, 3, rectification, catch bubbles, clear the ash. Catch a few points, the rest is careful and patient, as long as the steps above to personally paste a few, perhaps you can become a film master, embark on a rich road Oh!