Mobile phone with USB connection computer broadband Internet access (only 3 steps easy to access the Internet)

Want to use mobile phone internet, and there is no wifi. There's no traffic on the phone. (The main thing is to experience some computers can not download the task) as follows the theme and equipment debugging or something.
The steps are simple and take only two steps. The required software tools are as follows:
Computer software 1. Millet USB Drive (Win7 system will be installed automatically)
Mobile phone software 2. HyperTerminal (Better Terminal emulator Pro) wants to be a computer's cmd phone software (and can also tap the ADB command on the computer)

1. Open System Settings-system-shared mobile network-usb sharing network (millet phone is "USB binding")

2.USB connected to the computer, if it is Win7 without download driver will automatically install. There will be one more "local connection 4" in the network connection. (WinXP need to install the driver before you can operate)

Then find your broadband connection (the one on the Internet). Right-properties-sharing-allow other network users to pass this calculator ... Select on hook

Then find the virtual NIC (which is a local connection to the second network 4. The name machine may be different) right-properties Internet

Protocol version 4 (TCP/IPV4)-Use the following IP address: IP address is: 192.168.42.1 Subnet mask: 255.255.255.0

Preferred DNS service address: 8.8.8.8 other not to fill

Press "OK" and the computer step is over.

3. Open the phone software-HyperTerminal and then input su then enter the root state, if you need to give it root state point confirmation. (360 super Root)

Then enter BusyBox route add default GW 192.168.42.1

4. Then you can surf the Internet.

Open the application you will enjoy the Internet can be a mobile phone is so powerful. After you want to surf the Internet, Repeat steps 1th and 3rd .

Download HyperTerminal (you may need to wait a few seconds to open it).