Modern A200 (moboda 3360) GPRS internet access setting method

Select a modem: cellular telephone line (GPRS) ----> be sure to select this cellular device with GPRS.
Next step
Access Point name
Cmwap ----> This is very important. You must enter cmwap (Case Insensitive)
If you do not enter cmwap, you will not be able to even die. Do not fill in cmnet (this is an access point for mobile fraud)

Then, enter the username, password, and domain name for the next step.
Complete
Then

The following settings cannot be found again:
Proxy Server Settings
Select two selection boxes
This network is connected to the Internet
This network uses a proxy server to connect to the Internet
Enter
Proxy Server 10.0.0.172

Click Advanced
HTTP: 10.0.0.172: 80
WAP: 10.0.0.172: 9201
Secure WAP (optional)

first, check which Internet access method (cmwap or cmnet) you are using. Users in shenzhouxing and dynamic zone generally use cmwap, for global users, click [start]-[settings]-[connection]-[connection] In cmnet. Then, click [advanced]-[select Network]. on the network management page, select [new] When the Program is automatically connected to the Internet. on the displayed page, select [proxy server settings] And check [this network is connected to the Internet] and [this network is connected to the Internet using a proxy server]. In [proxy server:] enter 10.0.0.172 and click [OK] in the upper-right corner of the screen to complete the previous work. Then click [start]-[set]-[connection]-[connection] again. select [add new modem connection], select [cellular telephone line (GPRS)] from the drop-down menu of select modem, and click Next.: enter [cmnet] In the Access Point name, and click Next. The system prompts you to enter the user name, password, and domain. ignore this. click Finish-set a cmwap connection in the same way: Click [start]-[set]-[connection]-[connection], and select [add new modem connection]. select [cellular telephone line (GPRS)] from the drop-down menu of the modem, and then click Next. In: enter [cmwap] In the Access Point name. This is the channel for sending and receiving MMS messages. To see this option, open [manage existing connections] After the settings are complete.

first, choose "set"> "connection"> "point connection"> "advanced". Click "network" to enter the network management page, click "new", and enter a name (this name will be used below ), click the modem at the bottom, click New, enter any name, select the cellular telephone line (GPRS) from the select modem drop-down list, and click Next, enter cmwap in the Access Point (if you use WAP to access the Internet) and click Next. Do not enter anything in the above three boxes and click Finish directly. Click the proxy server settings at the bottom, and check the two selection boxes above. Click "advanced", click "HTTP", "WAP", and "secure WAP", set the Server IP address to 10.0.0.172, and click "OK" in the upper right corner to exit. (If you have already done this, do not do it again.) enter the SMS program, click menu> switch account> MMS, create a new MMS, click menu> Options> MMS settings, no matter which effective scenario mode, click Change, select a mode (profile), click Edit, change the scene mode name (any), and change the MMS server to quit.