Multi-channel serial Adda (tlv1544,tlc5620) module test manuals for the core Route FPGA Learning Suite

Multi-channel serial Adda module test manuals for the core Route FPGA Learning Suite

?

This manual introduces the test methods of the Adda module provided by the core Route FPGA learning kit in a concise manner:

?

1. Connect the development board as follows:

2. Connect the Adda V1.1 module with the development Board as shown:

1. Open the test engineering da_ad_v1.1 as shown in:

1. Burn write da_ad.sof files to the Development Board

?

1. Open the Signaltap II file as shown in:

1. Run Signaltap II, observe the wave shape of the window:

?

If the entire waveform, i.e., 1544 and 5620 of the two data are sine wave, it indicates that the Adda module is working properly. However, if only 5620 has a sine wave, it does not mean that 5620 is OK. Only two sine waves exist at the same time to indicate that the module is OK.

?

This test method is only for customers purchased after April 2016 12, before the purchase of customers, we will be the right opportunity to give free of charge in the latest version of this module PCB,PCB all the small pieces have been completed by the SMT Factory machine patch, only need to weld TLV1544 and TLC5620 chips, A capable friend can manually disassemble the two chips on the V1.0 and install them on the latest version of the PCB we provide. If you have any questions, please respond to the technical support group.

?

Brother Mei

Core Route Electronic Studio

April 12, 2016 Tuesday

?

Multi-channel serial Adda (tlv1544,tlc5620) module test manuals for the core Route FPGA Learning Suite